{"product_id":"alorair-sentinel-hdi120-120-pint-crawl-space-dehumidifier","title":"AlorAir Sentinel HDi120 120-Pint Crawl Space Dehumidifier with Pump","description":"\u003cp\u003eThe AlorAir Sentinel HDi120 is a crawl space, basement and whole-home dehumidifier that steps up from the HDi100, with a built-in condensate pump. It removes 120 pints of water a day at AHAM conditions (80°F, 60% RH) and 93 pints a day at DOE conditions (73°F, 60% RH), and is rated for up to 3,300ft² with 290 CFM of airflow.\u003c\/p\u003e\n\u003cp\u003eThat capacity comes in the same 23.8\" x 14.7\" x 17.9\" cabinet as the HDi100, drawing 7.8 A. It is sized for large basements, whole homes and big sealed crawl spaces, where the Sentinel HDi120 can be ducted at both ends and left to hold humidity on its own humidistat.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e120 Pints a Day at AHAM\u003c\/strong\u003e\u003cbr\u003eRemoves 120 pints a day at 80°F and 60% RH, and 93 pints at 73°F and 60% RH, with 290 CFM of airflow from a rotary compressor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCovers Up to 3,300ft²\u003c\/strong\u003e\u003cbr\u003eSized for large basements, whole homes and extensive sealed crawl spaces, on a 7.8 A draw from a 15 A GFCI circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt-In Condensate Pump\u003c\/strong\u003e\u003cbr\u003ePumps water out through the drain hose automatically, with a Drain button to empty the reservoir and an E4 alarm if the pump stops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo-Stage Filtration\u003c\/strong\u003e\u003cbr\u003eA washable MERV-1 pre-filter and a replaceable MERV-10 filter slide out of the intake side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrochannel Condenser\u003c\/strong\u003e\u003cbr\u003ePairs a microchannel condenser with a rare earth alloy tube evaporator, rated at 2.7 L\/kWh.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDucting on Both Ends\u003c\/strong\u003e\u003cbr\u003eInlet and supply each take 10\" flex duct through optional adapters, with a 10' maximum total run. An optional wired remote on a 25' CAT 5 cable adds its own humidity sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic Humidity Control\u003c\/strong\u003e\u003cbr\u003eHolds any setpoint from 36% to 90%, runs continuously below 36%, defrosts automatically down to 33.8°F and restarts on its last settings after a power cut.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Sentinel HDi120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Removal at AHAM (80°F, 60% RH):\u003c\/strong\u003e 120 pints\/day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Removal at DOE (73°F, 60% RH):\u003c\/strong\u003e 93 pints\/day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Up to 3,300ft²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 290 CFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 33.8°F to 104°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity Setpoint Range:\u003c\/strong\u003e 36% to 90%, plus continuous mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrainage:\u003c\/strong\u003e Built-in condensate pump with manual drain button; 19.6' drain hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct Connections:\u003c\/strong\u003e 10\" flex duct on inlet and supply (adapters optional), 10' maximum total run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 115 V, 60 Hz, 7.8 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Requirement:\u003c\/strong\u003e Grounded 3-prong GFCI outlet, 15 A circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 2.7 L\/kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e Rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilters:\u003c\/strong\u003e MERV-1 pre-filter and MERV-10 filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e Less than 60 dBA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 23.8\"L x 14.7\"W x 17.9\"H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 88 lbs (40 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e cETL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlorAir Sentinel HDi120 dehumidifier\u003c\/li\u003e\n\u003cli\u003eMERV-1 pre-filter and MERV-10 filter\u003c\/li\u003e\n\u003cli\u003eDrain hose\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \u0026amp; Placement\u003c\/h3\u003e\n\u003cp\u003eSeal the space first: AlorAir specifies a vapor barrier and sealed vents in a crawl space. Stand the unit level on blocks or pavers rather than directly on the barrier, with 6' clear in front of the inlet and discharge. If it was tipped in transit, leave it upright for 2 hours before switching on.\u003c\/p\u003e\u003cp\u003eSlide the compression nut over the drain hose, push the hose fully onto the fitting and tighten the nut, then route it to a drain, sump or outside. For ducted installs, keep the total duct run within 10'. Plug into a grounded 15 A GFCI circuit.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0893\/4037\/9501\/files\/alorair-sentinel-hdi120-installation-operations-manual.pdf?v=1790428489\" target=\"_blank\" rel=\"noopener\"\u003eAlorAir Sentinel HDi120 installation and operations manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty \u0026amp; Shipping\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping.\u003c\/strong\u003e Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.\u003c\/p\u003e\n\u003ch3\u003eAbout AlorAir\u003c\/h3\u003e\n\u003cp\u003eAlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for crawl spaces, basements and water damage restoration. Its Sentinel line is built for permanent installation in the spaces under and around a home.\u003c\/p\u003e\n\u003cp\u003eThe HDi100 and HDi120 are rated at 100 and 120 pints a day at AHAM, a step up from the Sentinel HDi90 and HD90, which remove 90 pints a day on a 5.56 A draw. For smaller crawl spaces, the Sentinel HDi65S covers up to 1,300ft².\u003c\/p\u003e","brand":"AlorAir","offers":[{"title":"Default Title","offer_id":67567973335405,"sku":"RF02ALOS-Sentinel-HDi120-0YAMW00","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/4037\/9501\/files\/alorair-sentinel-hdi120-components-01.jpg?v=1790428496","url":"https:\/\/mycleansupplies.com\/products\/alorair-sentinel-hdi120-120-pint-crawl-space-dehumidifier","provider":"My Clean Supplies","version":"1.0","type":"link"}