{"product_id":"pressurepro-m1-differential-pressure-recorder-with-printer","title":"PressurePro M1 Differential Pressure Recorder with Printer","description":"\u003cp\u003eThe PressurePro M1 differential pressure recorder is a manometer built for proving that containment held. It reads the pressure difference across your enclosure on a 4.3\" color touchscreen, logs it to 16MB of memory and prints time-stamped readings on a built-in thermal printer, all inside a hard case with a window in the lid.\u003c\/p\u003e\n\u003cp\u003eAsbestos abatement, mold remediation, water damage and hospital construction crews use it to document negative pressure through the whole job. A Pressure Assist outlet can run a spare negative air machine when pressure drifts, and a NIST-traceable certificate ships with every PressurePro M1.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePrinted, Time-Stamped Pressure Records\u003c\/strong\u003e\u003cbr\u003eReadings print every 30 minutes in range and every 2 minutes in alarm by default, with alarms and returns to normal marked on the tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Assist Outlet\u003c\/strong\u003e\u003cbr\u003eA switched 15 A outlet powers a spare negative air machine only while containment drifts, on at -0.022\" WC and off at -0.040\" WC by default.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwap the Printer on Site\u003c\/strong\u003e\u003cbr\u003eIf the printer fails, four screws and a plug-in harness let you fit a replacement module without sending the recorder away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.3\" Touchscreen in English or Spanish\u003c\/strong\u003e\u003cbr\u003eStart a job, name it, enter the address and set alarms from the touchscreen, in either language.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYears of Jobs in Memory\u003c\/strong\u003e\u003cbr\u003e16MB holds more than two years of logs, and any job can be reprinted or copied to a USB flash drive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh and Low Alarms\u003c\/strong\u003e\u003cbr\u003eAudible and visual alarms with a red screen when pressure leaves your window, green when it returns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReadable with the Lid Shut\u003c\/strong\u003e\u003cbr\u003eHang it by the handle and read the screen through the lid window, with the lid closed to protect the unit from water damage and knocks. For indoor, dry use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNIST-Traceable Accuracy\u003c\/strong\u003e\u003cbr\u003eShips with a certificate of accuracy, and temperature compensation holds readings steady as jobsite conditions change.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e PressurePro M1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring Range:\u003c\/strong\u003e +0.250\" to -0.250\" WC, positive or negative pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Units:\u003c\/strong\u003e Inches of water column (WC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 4.3\" color LCD, capacitive touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Languages:\u003c\/strong\u003e English and Spanish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Storage:\u003c\/strong\u003e 16MB internal, more than 2 years of logs; each job saved with its name, address and start and end dates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefault Log and Print Rate:\u003c\/strong\u003e Every 30 minutes in normal range, every 2 minutes in alarm (both adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarms:\u003c\/strong\u003e Programmable high and low limits, audible and visual (defaults -0.020\" and -0.040\" WC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Assist Outlet:\u003c\/strong\u003e Switched 120 VAC outlet, 15 A max, for one negative air machine up to 2,000 CFM; default on at -0.022\" WC, off at -0.040\" WC; AC power only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinter:\u003c\/strong\u003e Built-in thermal printer, replaceable with 4 screws and a plug-in harness; prints on AC power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Export:\u003c\/strong\u003e USB Type-A port for FAT32 flash drives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 120 VAC, 60 Hz, 16 A max input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e Internal 1800mAh lithium-ion polymer, about 3 hours of operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 32°F to 113°F on battery; -4°F to 140°F on AC power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor:\u003c\/strong\u003e Temperature-compensated with automatic zero-drift correction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Tubing Length:\u003c\/strong\u003e 70' of 5mm ID tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e NIST-traceable certificate of accuracy included; annual verification recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase:\u003c\/strong\u003e Hard case with a viewing window in the lid, side slot for tubing and cord, and a handle for hanging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited (register within 30 days)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePressurePro M1 differential pressure recorder in hard case\u003c\/li\u003e\n\u003cli\u003e10' pressure tubing\u003c\/li\u003e\n\u003cli\u003e6' power cord with 90° plug\u003c\/li\u003e\n\u003cli\u003e4 rolls of thermal printer paper\u003c\/li\u003e\n\u003cli\u003eOwner's manual\u003c\/li\u003e\n\u003cli\u003eNIST-traceable certificate of accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \u0026amp; Placement\u003c\/h3\u003e\n\u003cp\u003eSet the recorder outside the containment and plug it into a 120 VAC, 60 Hz outlet wired to code. Run the tubing from the brass barb labeled HOSE into the work area, well away from the entrance and the negative air machines, with no kinks or tight bends, and keep the run to 70' or less. Pass the tubing and cord through the slot in the side of the case before latching the lid.\u003c\/p\u003e\u003cp\u003eThe recorder can hang from its handle on a strong hook so the screen stays readable through the lid window. For asbestos negative pressure work, set Alarm 1 to -0.020\" WC and Alarm 2 to -0.060\" WC. For positive-pressure rooms such as clean rooms, use +0.060\" and +0.020\" WC.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0893\/4037\/9501\/files\/pressurepro-differential-pressure-recorder-owners-manual.pdf?v=1790595245\" target=\"_blank\" rel=\"noopener\"\u003ePressurePro differential pressure recorder owner's manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty \u0026amp; Shipping\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Adaptive Manometer Systems covers the PressurePro M1 against defects in materials and workmanship for 1 year from the original purchase date, for the original purchaser. Return the registration card within 30 days of purchase to activate coverage, and keep your receipt. Misuse, unauthorized repairs, power surges and normal wear are excluded.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService.\u003c\/strong\u003e Contact Adaptive Manometer Systems at 888-985-3955 or info@adaptivemanometers.com for a warranty number before sending a unit. The manufacturer repairs or replaces the recorder at its discretion, and returns must ship prepaid (no COD).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping.\u003c\/strong\u003e Shipping cost is calculated at checkout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check the carton and the contents when they arrive and note any damage on the delivery receipt before signing.\u003c\/p\u003e\n\u003ch3\u003eAbout PressurePro\u003c\/h3\u003e\n\u003cp\u003ePressurePro recorders are designed, assembled and calibrated by Adaptive Manometer Systems in Denver, Colorado. The company focuses on one job: differential pressure recorders for crews who must prove their containment held, in asbestos abatement, mold remediation, water damage restoration and healthcare construction.\u003c\/p\u003e\n\u003cp\u003eThe PressurePro M1 is the core recorder with the built-in printer, and the PressurePro M1w is the model with Wi-Fi for remote monitoring. For the M1, keep a PressurePro replacement printer and a box of 8 PressurePro thermal paper rolls on hand.\u003c\/p\u003e","brand":"PressurePro","offers":[{"title":"Default Title","offer_id":67578587382125,"sku":"PRESSUREPRO-M1","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/4037\/9501\/files\/pressurepro-m1-differential-pressure-recorder-with-printer-open-front-01_0b8a612c-9884-4fa0-8fb9-bb3501f20c2d.jpg?v=1790595834","url":"https:\/\/mycleansupplies.com\/products\/pressurepro-m1-differential-pressure-recorder-with-printer","provider":"My Clean Supplies","version":"1.0","type":"link"}