{"product_id":"pressurepro-replacement-thermal-printer","title":"PressurePro Replacement Thermal Printer","description":"\u003cp\u003eThe PressurePro replacement thermal printer is the plug-in print module for PressurePro differential pressure recorders. When a printer jams or fails mid-job, you swap the module on site and keep printing pressure logs, instead of shipping the whole recorder back for repair.\u003c\/p\u003e\n\u003cp\u003eKeeping one spare PressurePro printer in the truck means an abatement or restoration crew does not lose a day of printed containment records to a failed printer.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMinutes to Swap\u003c\/strong\u003e\u003cbr\u003eRemove four screws and the mounting plate, unplug the harness, plug in the new printer and refit the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for PressurePro\u003c\/strong\u003e\u003cbr\u003eIt is the only printer the recorder supports. Generic thermal printers will not work correctly and can damage the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTakes PressurePro Paper\u003c\/strong\u003e\u003cbr\u003eLoads the same PressurePro thermal rolls, dropped in with the loose end toward the bottom of the recorder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeeps the Record Going\u003c\/strong\u003e\u003cbr\u003eReprint any stored job after the swap, since logs live in the recorder's memory, not in the printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Power Tools Needed\u003c\/strong\u003e\u003cbr\u003eThe swap needs only a hand screwdriver; overtightening or power tools can damage the mounting.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Thermal printer module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e PressurePro differential pressure recorders (M1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e 4 screws and a plug-in wire harness; hand tools only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaper:\u003c\/strong\u003e Sold separately (PressurePro thermal printer paper)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003ePressurePro replacement thermal printer module\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSetup \u0026amp; Placement\u003c\/h3\u003e\n\u003cp\u003eUnplug the recorder from AC power and turn it off. Remove the four screws on the printer mounting plate, lift the plate and the old printer out, and gently work the harness connector loose. Plug the harness into the new printer, seat it, and refit the plate and screws with a hand screwdriver, without overtightening. Do not use power tools.\u003c\/p\u003e\u003cp\u003eLoad a PressurePro roll with the loose end toward the bottom of the recorder, then feed the paper out of the printer and close the cover before powering back up.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0893\/4037\/9501\/files\/pressurepro-differential-pressure-recorder-owners-manual.pdf?v=1790595245\" target=\"_blank\" rel=\"noopener\"\u003ePressurePro differential pressure recorder owner's manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty \u0026amp; Shipping\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSupport.\u003c\/strong\u003e For fitting or compatibility questions, contact Adaptive Manometer Systems at 888-985-3955 or info@adaptivemanometers.com.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping.\u003c\/strong\u003e Shipping cost is calculated at checkout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check the carton and the contents when they arrive and note any damage on the delivery receipt before signing.\u003c\/p\u003e\n\u003ch3\u003eAbout PressurePro\u003c\/h3\u003e\n\u003cp\u003ePressurePro recorders are designed, assembled and calibrated by Adaptive Manometer Systems in Denver, Colorado. The company focuses on one job: differential pressure recorders for crews who must prove their containment held, in asbestos abatement, mold remediation, water damage restoration and healthcare construction.\u003c\/p\u003e\n\u003cp\u003eThe replacement printer fits the PressurePro M1 differential pressure recorder. Pair it with PressurePro thermal printer paper, sold in boxes of 8 rolls.\u003c\/p\u003e","brand":"PressurePro","offers":[{"title":"Default Title","offer_id":67578587447661,"sku":"PRESSUREPRO-PRINTER","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/4037\/9501\/files\/pressurepro-replacement-thermal-printer-module-01.jpg?v=1790595272","url":"https:\/\/mycleansupplies.com\/products\/pressurepro-replacement-thermal-printer","provider":"My Clean Supplies","version":"1.0","type":"link"}