The AlorAir PureCare 1350 is a ceiling-mounted air filtration system that clears floating dust from woodworking and metalworking shops. Four MERV-11 filters surround a vortex fan, drawing air in from all four sides at 1,050 or 1,350 CFM on no more than 1.5 A, and AlorAir rates it for shops up to 1,700ft².
Hang the PureCare 1350 on chains or bolt it flush to the ceiling above the saws and sanders, then run it from the infrared remote with a 1 to 9 hour shutdown timer so the air keeps clearing after you leave.
Choose the standard 1350 or the 1350IG, which adds a built-in ionizer you can switch on from the remote.
Features
360° Intake
Four MERV-11 filters, one on each side, pull in dust from every direction. AlorAir rates them at 90% of 3-10 µm and 85% of 1 µm particles.
Two Speeds up to 1,350 CFM
Switch between 1,050 and 1,350 CFM from the panel or the remote, drawing no more than 1.5 A.
Ceiling Chain or Flush Mount
Hang it from four chains on hooks rated for 100 lbs. Flush mounting uses four brackets and expansion bolts; the brackets are not in the box list.
Infrared Remote
Controls power, speed and the timer from up to 27' away.
1 to 9 Hour Shutdown Timer
Set it to run on after the last cut and switch itself off.
Memory Restart
Returns to its last setting when power comes back after an outage.
Optional Ionizer (1350IG)
The 1350IG adds an ionizer that charges particles so the filters catch them more easily, switched from the remote.
Specifications
-
Model: PureCare 1350 (standard) / PureCare 1350IG (ionizer)
-
Airflow: 1,050 / 1,350 CFM (2 speeds)
-
Coverage: Up to 1,700ft²
-
Filter Type: 4 x MERV-11 (90% of 3-10 µm, 85% of 1 µm)
-
Intake: 360°, four sides
-
Ionizer: 1350IG only
-
Timer: 1 to 9 hours
-
Remote: Infrared, up to 27'
-
Voltage / Amps: 115 V, 60 Hz, 1.5 A max
-
Power Cord: 5'
-
Noise: Less than 69 dBA
-
Dimensions: 20.5"W x 20.5"H x 9.8"D
-
Weight: 27 lbs
-
Certifications: cETL
What's Included
- AlorAir PureCare 1350 or 1350IG air filtration system
- 4 MERV-11 filters (installed)
- Infrared remote control with 2 AAA batteries
- 4 hanging chains
- 4 hanging pieces and 4 nuts
- 4 screw hooks and 4 tapping screw hooks
- 4 expansion bolts and 4 screws
- User manual
Setup & Placement
Choose a spot near an outlet, at least 7' above the floor and 3' from corners and heating or air vents, with 2' of clearance around the inlet and outlet. Screw the hooks into the building structure, never into drywall or ceiling grid, hang the four chains, and level the unit by adjusting the chain lengths.
For a flush mount, fit four mounting brackets (not in the box list) with the M4 screws and fix them to the ceiling with the expansion bolts. Two people are needed for either method. Plug directly into a grounded outlet, without an extension cord.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers, air scrubbers and shop air filtration systems. The PureCare line is its range of air cleaners for woodworking shops, garages and other dusty workspaces.
The PureCare 1350 is the largest unit in the line, with a 360° intake and up to 1,350 CFM. The PureCare 780 and 1080 use a 270° intake with three filters, and the PureCare 780S and 1050 are portable units that sit on the floor or a bench. For restoration sites, AlorAir's CleanShield and PureAiro HEPA air scrubbers are the better fit.
