The PressurePro replacement thermal printer is the plug-in print module for PressurePro differential pressure recorders. When a printer jams or fails mid-job, you swap the module on site and keep printing pressure logs, instead of shipping the whole recorder back for repair.
Keeping one spare PressurePro printer in the truck means an abatement or restoration crew does not lose a day of printed containment records to a failed printer.
Features
Minutes to Swap
Remove four screws and the mounting plate, unplug the harness, plug in the new printer and refit the plate.
Made for PressurePro
It is the only printer the recorder supports. Generic thermal printers will not work correctly and can damage the unit.
Takes PressurePro Paper
Loads the same PressurePro thermal rolls, dropped in with the loose end toward the bottom of the recorder.
Keeps the Record Going
Reprint any stored job after the swap, since logs live in the recorder's memory, not in the printer.
No Power Tools Needed
The swap needs only a hand screwdriver; overtightening or power tools can damage the mounting.
Specifications
-
Type: Thermal printer module
-
Fits: PressurePro differential pressure recorders (M1)
-
Installation: 4 screws and a plug-in wire harness; hand tools only
-
Shipping Weight: 1 lb
-
Paper: Sold separately (PressurePro thermal printer paper)
What's Included
- PressurePro replacement thermal printer module
Setup & Placement
Unplug the recorder from AC power and turn it off. Remove the four screws on the printer mounting plate, lift the plate and the old printer out, and gently work the harness connector loose. Plug the harness into the new printer, seat it, and refit the plate and screws with a hand screwdriver, without overtightening. Do not use power tools.
Load a PressurePro roll with the loose end toward the bottom of the recorder, then feed the paper out of the printer and close the cover before powering back up.
Resources
Warranty & Shipping
Support. For fitting or compatibility questions, contact Adaptive Manometer Systems at 888-985-3955 or info@adaptivemanometers.com.
Shipping. Shipping cost is calculated at checkout.
Inspect on delivery. Check the carton and the contents when they arrive and note any damage on the delivery receipt before signing.
About PressurePro
PressurePro recorders are designed, assembled and calibrated by Adaptive Manometer Systems in Denver, Colorado. The company focuses on one job: differential pressure recorders for crews who must prove their containment held, in asbestos abatement, mold remediation, water damage restoration and healthcare construction.
The replacement printer fits the PressurePro M1 differential pressure recorder. Pair it with PressurePro thermal printer paper, sold in boxes of 8 rolls.
