The Unger HydroPower Nano Complete Pro 55' Kit (NAN55) is a high reach pure water window cleaning system for professionals who work on tall, multi story buildings. The Unger HydroPower Nano 55' kit combines the HydroPower Nano Pure Water System (NANOC) with HiFlo nLite HiMod carbon poles that reach 55', an unflagged 11" nLITE Power Brush, a DuroFlex hose and a HiFlo nLite carrying bag, so high windows can be cleaned from the ground without ladders or scaffolding.
Pure Water from the HydroPower Nano
At ground level the HydroPower Nano treats tap water in three stages. The combi pre-filter removes the largest impurities and chlorine and protects the membrane, the 40" large pore nano membrane removes up to 90% of the minerals, and the HydroPower Ultra DI resin unit takes out the rest. Output is up to 1.5 gal/min (5.68 l/min) of pure water at 60 PSI, and the digital TDS meter at the outlet shows the quality of every gallon; 0 is the target, and at 10 or more the resin should be replaced.
No electricity is needed: the Nano works on water pressure alone, from a minimum of 44 PSI (3 bar) at the inlet up to 90 PSI (6 bar). The Flow Optimizer Dial offers PURE, BLEND and FLUSH modes, and Unger states that balancing pressure and resin usage this way extends resin life up to four times. The unit measures 25.5" x 19" x 47.5", weighs 66 lb empty and rides on large wheels for uneven ground.
HiMod Carbon Poles to 55'
The pole set is built from HiFlo nLite HiMod carbon: one 264" section (UC67G, 3.6 lb) and three 132" sections (UC35G, 1.9 lb each), all in black high modulus carbon. Together they give the kit its 55' reach for upper floors on large commercial buildings. The nLITE Power Brush Complete (NUK28) at the top has 11" of unflagged gray nylon bristles to work dirt off the glass while pure water rinses it away.
The green DuroFlex hose (DLS25) runs pure water from the Nano to the brush, and the black nylon HiFlo nLite Carrying Bag (NLBA1) keeps the pole sections together in the van.
Built for High Glass
Unger lists large commercial buildings with multi story windows, shopping malls with extensive glass facades, schools and public buildings with hard to reach windows, and airports and transportation hubs with high, elevated windows as typical sites. Where tap water is high in TDS and the glass is high above the street, the Unger HydroPower Nano 55' kit supplies the pure water, the poles and the brush for the whole job.
Features
55' Reach with HiMod Carbon
One 264" UC67G section and three 132" UC35G sections of HiFlo nLite HiMod carbon reach 55'. Upper floors can be cleaned from the ground.
Complete Pure Water Kit
NAN55 combines the HydroPower Nano system, poles, brush, hose and carrying bag. The kit covers water treatment and pole work in one setup.
Three Stage Hybrid Filtration
A pre-filter, a 40" nano membrane and HydroPower Ultra DI resin purify tap water. The membrane removes up to 90% of the minerals before the resin.
Up to 1.5 gal/min at 60 PSI
The Nano produces up to 1.5 gal/min (5.68 l/min) of pure water. The DuroFlex hose carries it to the brush at the top of the pole.
Flow Optimizer Dial
PURE, BLEND and FLUSH modes balance pressure against resin use. Unger states this extends resin life up to four times.
Runs Without Electricity
Water pressure from 44 PSI (3 bar) to 90 PSI (6 bar) drives the whole system. There is no power connection to arrange on site.
11" nLITE Power Brush
The NUK28 brush carries 11" of unflagged nylon bristles. Pure water flows through the head as you scrub.
Digital TDS Meter
The meter reads the water at the outlet after membrane and resin. Replace the resin when it shows 10 or more.
Specifications
-
Brand: Unger
-
Model: NAN55
-
UPC: 761475672221
-
System type: Hybrid nanofiltration and deionization, 3 stage
-
Reach: 55'
-
Pure water output: Up to 1.5 gal/min (5.68 l/min) at 60 PSI
-
Power: None required; runs on water pressure
-
Input pressure: Minimum 44 PSI (3 bar), maximum operating 90 PSI (6 bar)
-
Maximum water temperature: 85°F (30°C)
-
Nano system (NANOC): 25.5" L x 19" W x 47.5" H, 66 lb empty, stainless steel, black
-
Pole section (UC67G): HiFlo nLite HiMod carbon, 264" L, 3.6 lb, black, qty 1
-
Pole sections (UC35G): HiFlo nLite HiMod carbon, 132" L, 1.9 lb each, black, qty 3
-
Brush (NUK28): nLITE Power Brush Complete, unflagged, 11", nylon bristles, 0.8 lb, gray
-
Carrying bag (NLBA1): HiFlo nLite, nylon, 80" L, 5 lb, black
-
Hose (DLS25): DuroFlex, green, 984" (82')
-
Warranty: Unger Limited Lifetime Commercial Warranty (original purchaser, authorized reseller)
What's Included
- HydroPower Nano Pure Water System (NANOC)
- HiFlo nLite HiMod Carbon Pole (UC67G), 1
- HiFlo nLite HiMod Carbon Poles (UC35G), 3
- nLITE Power Brush Complete, unflagged (NUK28)
- HiFlo nLite Carrying Bag (NLBA1)
- DuroFlex Hose (DLS25)
Installation & Care
Installation
To start the Nano when new, turn the concentrate valve to WORK, set the Flow Optimizer Dial to PURE and run the system for at least 10 minutes to saturate the membrane; the pre-filter housing must fill completely with water. For daily use, connect the tap water inlet hose and the DuroFlex hose to the outlet, assemble the HiMod pole sections to the height needed and fit the NUK28 brush at the top. For transport, remove the front hoses and connect the concentrate hose to the upper inlet to avoid spills.
Care
Clean the Nano of dirt after each use and depressurize it before maintenance. Use only water of known drinking quality, no warmer than 85°F. Replace the resin when the TDS meter reads 10 or more, the combi pre-filter (PFCRN) after approximately 8,000 gallons (30,000 l), and the membrane (NAMEM) every 3 to 5 years with proper care. Before storage or more than 14 days without use, treat the membrane with one 1 L bottle of Membrane Maintenance Liquid (ROMML). Keep the pole sections in the carrying bag.
Resources
Shipping, Returns & Warranty
You'll get tracking by email as soon as this item ships. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Unger products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, and a restocking fee of up to 20% may be deducted along with payment processing fees. Used items and special-order items can't be returned.
Unger covers this product with its Limited Lifetime Commercial Warranty for the original purchaser when it is bought from an authorized Unger reseller, as My Clean Supplies is. If the product has a defect in materials or workmanship, Unger will, at its option, replace or refund the product or the defective part free of charge. Unger defines lifetime as the reasonably expected useful life of the product under normal commercial use. Consumable items that need routine replacement, such as squeegee rubber, scraper blades, microfiber cloths, mop pads, resin, filters, membranes and cleaning solution, are not covered. Keep your proof of purchase.
About Unger
Unger was founded in 1964 by Henry Unger, a working window cleaner who set out to make the tools commercial cleaners use every day easier, more efficient and safer to work with. Unger Enterprises, LLC runs its US business from Bridgeport, Connecticut, and its professional range covers outdoor and indoor window cleaning, pure water window cleaning systems, dusting and high access cleaning, floor care and mopping, restroom cleaning and litter removal tools.
The Complete Pro 55' Kit is the 55' version of Unger's HydroPower Nano kits; the HydroPower Nano Complete Pro 39' Kit uses nLITE Carbon 24K poles, and the HydroPower Nano Pure Water System is sold on its own. The HydroPower Ultra 16K Entry Kits at 33' and 40', the nLITE Carbon 16K Starter Kits and the flagged nLITE Power Brush complete the range.
