A heated extractor package, ready to clean.
A 1,200 watt heated extractor with a 120 PSI pump and 10-gallon tanks, packaged with a 15' hose combo and a 12" dual jet wand.
The extractor ships with Mytee's 8500 15' hose set and 8300-EZ 12" dual jet wand.
12" dual jet wand
The 1,200 watt in-line heater brings water up to 210°F to break up grease and dirt.
210°F max temperature
A single 25' 12/3 cord powers the vacuum, pump and heater from one 20 A outlet.
20 A amp draw
What it is
The Mytee 2002CS Contractor's Special is a heated portable carpet extractor package for residential and commercial carpet cleaning and hard-surface extraction. The extractor pairs a 120 PSI diaphragm demand pump (1.3 GPM) with a single 3-stage vacuum motor rated at 100 CFM and 130" of water lift and a 1,200 watt in-line heater (210°F maximum), and it ships with a 15' vacuum and solution hose combo and a 12" dual jet stainless steel wand.
Tanks and setup
Its solution and recovery tanks hold 10 gallons each. Contractor's Special packages are designed for routine carpet maintenance in offices, schools, residences and more, and Mytee pre-assembles them so the wand, hose and connections already match the extractor.
Power and other models
The 2002CS runs on a single attached 25' 12/3 power cord and draws 20 A at 115 V, so one outlet runs the vacuum, pump and heater. For dual vacuums, a 220 PSI pump and a 25' hose, see the 2005CS (unheated) or the 2008CS (2,000 watt heater).
Moving it
10" foam-filled, non-marking rear wheels and 4" locking front casters move it around the job, and built-in loading wheels let you roll it into a work vehicle without a ramp. The housing is roto-molded polyethylene that resists rust and dents, with an easy-open lid, a bucket-height drain and waist-high switches.
Package and warranty
The package includes Mytee's 8500 hose set (15' crush-proof 1.5" vacuum hose and high-pressure solution hose) and the 8300-EZ 12" dual jet wand with disconnect, plus a 2" to 1.5" Cuff-Lynx reducer. The P507 transport tray fits the 2002CS. The extractor is covered by Mytee's warranty: 1 year parts and labor, 2 years on major components such as pumps, vacuum motors and heaters, and 10 years on roto-molded housings and tanks.
At a glance
-
Heater1,200 watt
-
Pump120 PSI
-
Vacuum100 CFM, 130"
-
Tanks10 / 10 gal
-
Hose15' combo
-
Wand12" dual jet
Ready-To-Clean Package
Ships with the 8500 15' hose set and the 8300-EZ 12" dual jet stainless steel wand.
1,200 Watt In-Line Heater
Heats water up to 210°F to break up grease and dirt.
Single-Cord Operation
One attached 25' 12/3 cord runs the whole machine from a 20 A outlet.
120 PSI Demand Pump
A 1.3 GPM diaphragm pump with a single 3-stage vacuum rated at 100 CFM and 130" of water lift.
Built-In Loading Wheels
Roll the extractor in and out of a work vehicle without a ramp.
Waist-High Switches
Switches and easy-access components reduce bending.
Easy-Open Lid and Bucket-Height Drain
Check and empty the recovery tank without lifting the machine.
Roto-Molded Polyethylene Housing
Resists rust and dents, with 10 years of Mytee warranty coverage on housings and tanks.
Key specs
Heater
1,200 watt, 210°F max
Vacuum
100 CFM, 130" lift
Performance
Solution Pump120 PSI diaphragm demand pump, 1.3 GPM
Vacuum MotorSingle 3-stage, 100 CFM, 130" water lift
Heater1,200 watt in-line, 210°F maximum
Capacity
Solution Tank10 gal (37.9 L)
Recovery Tank10 gal
Package
Hose8500 hose set: 15' vacuum and solution hose combo, 1.5" vacuum hose, 0.25" solution hose
Wand8300-EZ 12" dual jet stainless steel wand
Cleaning Path12"
Electrical
Power CordSingle 25' (7.6 m) 12/3, attached
Amp Draw20 A at 115 V
Build
BodyRoto-molded polyethylene
Wheels10" foam-filled non-marking rear, 4" locking front casters, built-in loading wheels
Dimensions (extractor)28" x 19" x 40" (71 x 48 x 102 cm)
Weight (extractor)87 lb (39.5 kg)
Model and use
Model No.2002CS
SeriesContractor's Special
UsesResidential and commercial carpet cleaning, hard-surface extraction
In the box (5)
×1Mytee 2002CS heated carpet extractor
×18500 15' vacuum and solution hose combo (1.5" vacuum hose)
×18300-EZ 12" dual jet stainless steel wand
×12" to 1.5" Cuff-Lynx reducer
×125' 12/3 power cord (attached)