The AlorAir Sentinel Pro 55X puts 55 pints a day of water removal at AHAM conditions (80°F, 60% RH), and up to 120 pints a day at saturation (90°F, 90% RH), into the same slim cabinet as the Pro 35X. AlorAir rates it for spaces up to 1,500ft² on 3.5 A.
It suits a larger basement, storage room or wine cellar where the 35X would run flat out. Four 360° wheels, a built-in pump with a gravity option and GPP control make the Sentinel Pro 55X simple to place and leave running.
Features
Built-In Pump or Gravity Drain
Hold Drain for 3 seconds to pump through the 19.6' hose, or drain by gravity through the 6.5' hose.
Humidity or GPP Control
Set 25% to 80% RH, or a moisture content target from 25 to 200 grains per pound in steps of 5.
Low Power Draw
3.5 A (408 W) at 2.57 L/kWh.
Screen Lock
Hold Lock for 3 seconds so the settings cannot be changed by accident.
Memory Restart and Auto Defrost
Resumes its setpoint, GPP mode and pump setting after a power cut, and clears coil ice in cool rooms.
Slim Cabinet on 360° Wheels
12.9" x 14.14" x 24.55" and 45 lbs, with handles and a cord and hose wrap.
Washable MERV-1 Filter
Slides out of the rear intake grille for vacuuming or rinsing.
Specifications
-
Model: Sentinel Pro 55X
-
Water Removal at AHAM (80°F, 60% RH): 55 pints/day
-
Water Removal at Saturation (90°F, 90% RH): 120 pints/day
-
Coverage: Up to 1,500ft²
-
Airflow: 187 CFM
-
Operating Temperature: 37.4°F to 100.4°F
-
Humidity Setpoint Range: 25% to 80% RH; GPP mode 25 to 200; continuous mode
-
Drainage: Built-in pump (19.6' hose) or gravity drain (6.5' hose)
-
Power: 115 V, 60 Hz, 3.5 A (408 W)
-
Electrical Requirement: Grounded 3-prong GFCI outlet, 15 A circuit
-
Efficiency: 2.57 L/kWh
-
Filter: MERV-1, washable
-
Noise: 52 dBA
-
Dimensions: 12.9"L x 14.14"W x 24.55"H
-
Weight: 45 lbs (20.4 kg)
-
Certifications: cETL
What's Included
- AlorAir Sentinel Pro 55X dehumidifier
- MERV-1 filter
- User manual
Setup & Placement
Place the unit upright on the floor in a fully enclosed room, ideally near the center, with the inlet and outlet clear of walls. Keep windows closed while it runs.
For pump drainage, plug the gravity outlet, attach the 19.6' hose to the pump outlet and hold Drain for 3 seconds. For gravity drainage, fit the 6.5' hose and run it downhill. Plug into a grounded 3-prong GFCI outlet on a 15 A circuit.
Resources
Shipping, Returns & Warranty
Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused AlorAir equipment in its original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. Returns that aren't due to a defect carry AlorAir's 20% restocking fee, and you pay the return shipping. If the unit is defective, AlorAir covers the return shipping. Payment processing fees are not refunded. Used or contaminated units and special-order items can't be returned.
Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for crawl spaces, basements and water damage restoration. Its Sentinel commercial models are built for garages, basements, warehouses and other large rooms that need humidity held steady.
The Sentinel Pro 35X and Pro 55X are the compact models in AlorAir's Sentinel commercial range. The Sentinel Elite 50X, 60X and 80X move up to a larger wheeled cabinet at 50 to 80 pints a day, and the Sentinel SLGR 1400X reaches 140. For crawl spaces, the Sentinel HD and HDi models are built for permanent installs.
