AlorAir GE1000 1000 CFM Air Mover with 20' Cord
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop Now
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The AlorAir GE1000 is a 1000 CFM centrifugal air mover for drying carpets, floors, walls and furniture after a spill, a cleaning job or a leak. Its 1/5 HP motor draws only 1.5 A at 115 V, and the whole unit weighs 11.24 lbs.
This is the plain model of the series: three speeds, five operating positions and a long 20' cord that reaches across a room without an extension. It is the one to buy when you want airflow without outlets or a timer, for contractors, janitorial crews and homeowners alike.
1000 CFM Airflow
A centrifugal blower pushes up to 1000 CFM through a low, wide outlet that sweeps across wet floors and carpet.
20' Power Cord
Reaches outlets across a room without an extension cord, and wraps on the switch plate for storage.
Three Speeds
A rotary switch sets low, medium or high, from quiet circulation to full drying.
Five Operating Positions
Runs flat, tilted 10° up or down, at 45° or at 90° to dry floors, walls and ceilings.
Low 1.5 A Draw
A 1/5 HP motor on 115 V leaves room on the circuit for a dehumidifier and more air movers.
Light and Stackable
11.24 lbs with a molded handle, and units stack on their sides up to four high for storage.
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. Its air movers are built to be carried from job to job and work alongside AlorAir's restoration dehumidifiers.
The GE1000 series sits between the compact GF600A (600 CFM) and the GE2000 series (2000 CFM). Choose the GE1000 for general drying, the GE1000A to daisy-chain units, the GE1000T for automatic shut-off, or the GE1000AT for both. For whole-room restoration, the GE2000, GE3000 and GE4000 series move more air per unit.
The GE1000 series moves up to 1000 CFM from a 1/5 HP motor drawing 1.5 A, in a centrifugal housing that weighs 11.24 lbs. Air leaves through a low, wide outlet that sweeps across the floor, which is what dries carpet and hard floors quickly.
Place one unit in a corner of a small room, or one in each corner of a larger room so the airflow circulates around the space.
A built-in stand sets the housing flat, tilted 10° up or down, at 45° or straight up at 90°, so the same unit dries a floor, a wall or a ceiling. The rotary switch gives three speeds.
It works from 14°F to 122°F. Between jobs the cord wraps on the switch plate, and units stack on their sides, up to four high.
Got Questions?
Find answers below or contact our support team.
The blower is the same 1000 CFM unit. The A models add GFCI outlets with a reset button for daisy-chaining and have a 10' cord. The T models add a 3-hour timer. Models without an A have a 20' cord. The GE1000AT has both the outlets and the timer.
1.5 A at 115 V (1/5 HP). AlorAir specifies a GFCI protected outlet and warns against solid-state speed controllers.
AlorAir rates it at 68 dBA. Low speed is quieter for occupied rooms; high speed dries fastest.
Yes, on their sides with the air inlets lined up and each unit turned about 30°. AlorAir says no more than four high, and stacks are not secure in transit.
AlorAir lists an operating range of 14°F to 122°F. If it stops in extreme heat, turn it off, unplug it and let it cool.
Proud to Have Served















































