AlorAir GE3000HTC 3000 CFM Air Mover with Wheels, Timer and Carpet Clamp
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop Now
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The AlorAir GE3000HTC is a 3000 CFM air mover you roll instead of carry. A pull-out handle and wheels move its 27.51 lbs between rooms, and a carpet clamp holds the carpet edge so air blows under it as well as over it.
It keeps simple dial controls: three speeds and a 3-hour timer that switches it off when the drying run is done. The 4/5 HP motor draws 5.6 A at 115 V, and the unit runs in four positions, from flat to straight up.
Pull-Out Handle and Wheels
Press the button, pull out the handle and roll the unit on its wheels like a trolley.
Carpet Clamp
Tuck the carpet edge under the clamp and tighten the screws to blow air beneath the carpet as well as over it.
3000 CFM Centrifugal Blower
A 4/5 HP motor on 5.6 A drives up to 3000 CFM through a low outlet that sweeps air across wet floors and carpet.
3-Hour Timer
A dial timer counts down up to 180 minutes, then stops the unit. Set it to ON to run continuously.
Four Operating Positions
Runs flat, tilted 10° up or down, or straight up at 90° to dry floors, walls and ceilings.
20' Power Cord
Reaches outlets across a room without an extension cord, and wraps on the housing for storage.
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. Its air movers are built to be carried from job to job and work alongside AlorAir's restoration dehumidifiers.
The GE3000 series shares its housing with the GE2000 series (2000 CFM) but runs a larger motor, and sits below the GE4000 series (4000 CFM). The GE3000T is the base model, the GE3000TF adds intake filters, the GE3000HTC adds wheels and a carpet clamp, and the GE3000HCW adds a digital panel with app control.
The GE3000 series moves up to 3000 CFM from a 4/5 HP motor, in the same 16.06" x 14.02" x 17.24" housing as the GE2000 series. You get 50% more airflow per unit without a bigger machine to carry up stairs.
It draws 5.6 A at 115 V, so plan circuits accordingly: two units fill most of a 15 A circuit.
Every model sits flat to sweep a floor, tilts 10° up or down, or stands straight up at 90° for walls and ceilings, and the T and TF models add a 45° position. Three speeds step the airflow up as the job demands.
AlorAir lists an operating range of 23°F to 160°F. Keep inlets and outlets clear, and never run it standing in pooled water.
After extraction, a GE3000 aimed low across the carpet speeds up drying so the room is back in use sooner. The HTC and HCW models add a carpet clamp: tuck the carpet edge under it to blow air beneath the carpet as well as over it.
Units stack on their sides, up to four high, and the cord wraps on the housing for storage.
Got Questions?
Find answers below or contact our support team.
AlorAir rates the GE3000 series at 77 dB against 67 dB for the GE2000, so it is noticeably louder at full speed. Use low speed in occupied rooms.
It draws 5.6 A at 115 V. Plug into GFCI protected outlets, and do not load more than about two units on a standard 15 A circuit with nothing else running.
The suffix letters mark the extras: T is a 3-hour timer, F adds two washable intake filters, C adds a carpet clamp, H adds a pull-out handle with wheels, and W adds a digital panel with an 18-hour timer and app control.
On the HTC and HCW models, loosen the clamp screws, tuck one edge of the carpet under the clip and tighten the screws, then switch on. Air blows under the carpet as well as over it.
24.56 lbs for the GE3000T, 24.89 lbs for the GE3000TF, 27.51 lbs for the GE3000HTC and 27.6 lbs for the GE3000HCW.
Proud to Have Served















































