AlorAir GF600A 600 CFM Air Mover with Daisy-Chain Outlets
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop Now
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The AlorAir GF600A is a compact centrifugal air mover that blows up to 600 CFM across floors, carpets and walls to speed up drying. It draws just 1.0 A at 115 V and weighs 7.9 lbs, so it goes wherever the water went: bathrooms, cabinets, crawl spaces and tight corners.
Three speeds (350, 470 and 600 CFM) and five operating positions cover everything from gentle circulation to a full drying run. Outlets on the switch plate let you daisy-chain more units from one wall outlet, and the GF600A stacks for storage between jobs.
Available in blue, red or yellow.
600 CFM Centrifugal Blower
Moves up to 600 CFM through a low outlet that sweeps air across wet floors and carpet, where evaporation happens.
Three Speeds
Low 350 CFM, medium 470 CFM and high 600 CFM on a rotary switch, from quiet circulation to full drying.
Five Operating Positions
Runs flat, tilted 10° up or down, at 45° or straight up at 90° to dry floors, walls or ceilings.
Daisy-Chain Outlets
Power more equipment from the outlets on the switch plate, with a reset button if the outlet circuit trips. Keep the total under 12 A.
Light 1.0 A Draw
Uses 1.0 A at 115 V with a 1/8 HP motor, leaving room on the circuit for other drying equipment.
Easy to Carry and Store
7.9 lbs with a molded handle, a 10' cord that wraps on the switch plate, and a stackable body, up to four high.
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. Its air movers are built to be carried from job to job and work alongside AlorAir's restoration dehumidifiers.
The GF600A is the smallest unit in AlorAir's centrifugal air mover range, followed by the GE1000 series (1000 CFM) and the larger GE2000, GE3000 and GE4000 series for restoration crews. Pair it with an AlorAir dehumidifier to pull the evaporated moisture out of the room.
The GF600A pushes up to 600 CFM from a centrifugal blower that weighs 7.9 lbs and stands 12.52" tall. It fits under counters, into cabinets, bathrooms and crawl spaces, where a full-size air mover will not sit.
Aim it along a wet floor or carpet edge after a spill or a cleaning job. For whole rooms after a flood, larger units such as the GE2000 series cover more floor per machine.
A rotary switch sets low, medium or high, for 350, 470 or 600 CFM. Low is quiet enough for an occupied office or home; high moves the most air across a wet carpet or floor.
The motor draws 1.0 A at 115 V. Use it only on a GFCI protected outlet, and never with a solid-state speed controller.
Outlets on the switch plate power a second air mover or other equipment, with a reset button if the outlet circuit trips. AlorAir's guidance is to keep the total draw under 12 A.
Between jobs the cord wraps around the switch plate, and units stack on their sides, up to four high. Stacks are for storage only, not for transport.
Got Questions?
Find answers below or contact our support team.
Plug the next unit into the outlet on the switch plate and keep the combined draw under 12 A, AlorAir's stated limit. Each GF600A draws 1.0 A, but add up anything else on the chain, and use a GFCI protected wall outlet at the start.
AlorAir rates it at 65 dBA or less. Low speed (350 CFM) is the quiet setting for occupied spaces; high speed (600 CFM) is louder but dries fastest.
No. It runs until you switch it off. If you need an automatic shut-off, the GE1000T and GE1000AT have a 3-hour timer.
10', with a cord wrap and clip on the switch plate for storage. AlorAir says not to run the cord under carpet or rugs.
Yes. It has five operating positions: flat (0°), tilted 10° up or down, 45° and 90° straight up, so you can aim at floors, walls or a ceiling.
Proud to Have Served















































