Air Treatment

The Novatek Novair 2000 is a horizontal air scrubber and negative air machine with a thermally protected 2 hp, two-speed motor. A pad pre-filter an...

The Novatek Novair 1000 is an upright, two-speed air scrubber built around a 1 hp motor that moves 1000 cfm on high and 500 cfm on low with every f...

The Minuteman A3SM is a mini air mover for small spaces: a 10.5 lb unit whose sealed 1/5 HP three-speed motor moves up to 800 CFM on high. It sets ...

The Minuteman A3S is a three-speed air mover that delivers up to 1050 CFM from a sealed 1/3 HP motor, for drying carpet and floors after extraction...

The AlorAir Zeus Extreme is an axial air mover for water damage restoration, carpet drying and job site ventilation. Its 2-speed PSC motor pushes a...

The AlorAir Zeus 900 is a low-profile radial air mover for drying carpet and pad, walls, stairs and floors after water damage. It pushes about 950 ...

The AlorAir X-Force is a structural drying system that dries the inside of wet walls, ceilings and cabinets without tearing out drywall. A blower d...

The AlorAir X-Force Air Mover Base Unit is the blower on its own: the drive unit of the X-Force wall cavity drying system. Use it to add a second d...

The AlorAir VentirPro-S2 is a crawl space ventilation fan with two DC fans on a stainless steel plate, exhausting up to 240 CFM through a foundatio...

The AlorAir VentirPro 720S is the highest-airflow VentirPro in stainless steel, exhausting 720 CFM through a foundation vent for crawl spaces of 5,...

The AlorAir VentirPro 720 is the largest knob-controlled VentirPro, exhausting 720 CFM through a foundation vent for crawl spaces of 5,600ft³ to 7,...

The AlorAir VentirPro 540S exhausts 540 CFM through a foundation vent from a stainless steel housing, for crawl spaces of 3,600ft³ to 5,600ft³. Cho...

The AlorAir VentirPro 540 moves 540 CFM out through a foundation vent, for mid-size crawl spaces of 3,600ft³ to 5,600ft³ as AlorAir rates it. More ...

The AlorAir VentirPro 260S is the stainless steel version of the VentirPro 260: a crawl space ventilation fan that exhausts 260 CFM through a found...

The AlorAir VentirPro 260 is a crawl space ventilation fan that mounts over a foundation vent and exhausts 260 CFM of damp air. AlorAir sizes it fo...

The AlorAir VentirMax 780SD is the top of the VentirMax range: 780 CFM from a stainless steel fan with the programmable SD controller, for crawl sp...

The AlorAir VentirMax 780S is the largest knob-controlled VentirMax, exhausting 780 CFM through a foundation vent for crawl spaces up to 1,300ft². ...

The AlorAir VentirMax 570SD brings the digital SD controller to a 570 CFM stainless fan, for crawl spaces up to 950ft² as AlorAir rates it. Program...

The AlorAir VentirMax 570S exhausts 570 CFM through a foundation vent from a stainless steel housing, for crawl spaces up to 950ft² as AlorAir rate...

The AlorAir VentirMax 300SD is a programmable crawl space ventilation fan: a stainless steel, 300 CFM unit with a digital controller that runs on h...

The AlorAir VentirMax 300S is a stainless steel crawl space ventilation fan that exhausts 300 CFM through a foundation vent, covering up to 550ft² ...

The AlorAir Storm Ultra is an app-controlled upright dehumidifier for water damage restoration and large basements. It removes 90 pints a day at AH...

The AlorAir Storm SLGR 850X is an app-controlled restoration dehumidifier built on the Storm LGR 850 platform with AlorAir's SLGR precooling circui...

The AlorAir Storm Pro is an upright restoration dehumidifier with a heavy-duty condensate pump, sized for basements, offices and job sites up to 2,...