The LS-AZ116 Vitruvius Series is an ANZZI 21" rectangular vitreous china vessel sink in glossy white. It is a smoothly polished basin with the delicate features of fine china and the durability of high-end ceramics. The bowl has its own single 35 mm faucet hole.
The sink measures 20.5" x 17", with a standard 1.75" drain opening and a back side built-in overflow.
The material is RHINO ALLOY approved artisan strength vitreous china, with a non-porous, long lasting polished white finish, and the sink is cUPC and CSA certified. Installation is vessel or farmhouse style.
Installing the LS-AZ116 on Your Counter
ANZZI's vessel sink manual asks you to read the whole instruction sheet before you start, observe all local building and safety codes, and inspect the sink as soon as it arrives, reporting any damage to ANZZI's customer service right away. The tools and materials it lists are silicone sealant, a damp cloth, a basin wrench and thread sealant. Place the sink upside down on the counter on a towel or other soft cloth, apply a continuous bead of silicone to the base where it will rest on the counter, then turn it right side up and position it over the 2" drain hole. Remove any excess silicone with a damp cloth and let the silicone dry for 24 hours. ANZZI recommends consulting a professional if you are unfamiliar with this type of installation, and states that it accepts no liability for damage to floors, walls or plumbing, or for injury, during installation.
ANZZI does not include the drain assembly; because the bowl has a back side built-in overflow, plan a 1.75" drain with an overflow opening. ANZZI's drain steps: disassemble the drain by removing the threaded tail piece, rubber sealing gaskets, friction washer and lock nut; put thread sealant on the tail piece threads and reattach it; slide the flat rubber gasket up to the top of the drain body, where it seals the drain flange to the sink; place the drain in the sink's drain hole; from under the counter fit the tapered rubber gasket flat side down until it meets the sink, slide the friction washer up to it, and thread on the lock nut. Hand-tighten, check the drain is aligned, then finish with a basin wrench.
A Faucet Hole in the Sink Deck
For the vitreous china, clean regularly with soap, hot water and a non-abrasive cloth or sponge, which avoids build-up or deposits that would be tougher to remove. Test any stronger cleaner on an inconspicuous area first, rinse completely with water straight after, dry any overspray and never let the cleaner soak.
The Vitruvius Series also includes LS-AZ129 (18.5" x 18.5" round), LS-AZ130 (20.5" x 16.3" rectangular). As an ANZZI 21" rectangular vitreous china vessel sink with its own 35 mm faucet hole, a back side overflow and cUPC and CSA certification, the LS-AZ116 gives a vanity a polished white bowl with the faucet built onto the sink.
Features
Single 35 mm Faucet Hole
The LS-AZ116 has a single 35 mm faucet hole in the china, so a single hole faucet mounts on the sink deck instead of the counter.
20.5" x 17" Rectangular Bowl
The sink measures 20.5" x 17", with a standard 1.75\" drain opening and a back side built-in overflow.
Back Side Built-In Overflow
The bowl has a back side built-in overflow, so it needs a 1.75" drain that has an overflow opening.
cUPC and CSA Certified
The Vitruvius Series vessel sink carries cUPC and CSA certification in all three sizes, LS-AZ116, LS-AZ129 and LS-AZ130.
RHINO ALLOY Approved Vitreous China
The sink is made from RHINO ALLOY approved artisan strength vitreous china, with a smoothly polished basin.
Polished White Finish
The vitreous china bowl carries a non-porous, long lasting polished white finish, cleaned with soap and hot water.
Standard 1.75" Drain Opening
The sink has a standard 1.75" drain opening; ANZZI does not include the drain assembly, so it is bought separately.
Top-Mount Installation
The sink is listed for vessel or farmhouse style installation; the vessel manual seals the base to the counter with silicone over a 2" drain hole.
Specifications
-
Model: LS-AZ116
-
Dimensions: 20.5" x 17"
-
Shape: Rectangular
-
Material: Vitreous china (ANZZI RHINO ALLOY approved)
-
Finish: Polished white
-
Mounting: Vessel or farmhouse style installation
-
Faucet Holes: Single, 35 mm
-
Overflow: Back side built-in
-
Drain Opening: 1.75"
-
Drain: Not included
-
Certifications: cUPC, CSA
-
Series: Vitruvius
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- LS-AZ116 Vitruvius vitreous china vessel sink in white
Sold separately: Drain assembly, Faucet
Installation & Care
Installation
Top mount over a single 2" drain hole in the counter. Read the full instructions first and observe all local building and safety codes. Set the sink upside down on a soft cloth, run a continuous bead of silicone around its base, turn it over onto the drain hole, wipe off excess with a damp cloth and let it dry for 24 hours. Then fit a 1.75" drain with an overflow opening (not included) with thread sealant and a basin wrench, and mount a single hole faucet through the sink's 35 mm hole. ANZZI recommends consulting a professional if you are unfamiliar with this type of installation.
Care
Clean regularly with regular soap and hot water and a non-abrasive cloth or sponge, so build-up does not form. Test any stronger cleaner on an inconspicuous area first, wipe and rinse completely with water immediately after, rinse and dry overspray on nearby surfaces, and do not allow the cleaner to soak.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Vitruvius Series includes LS-AZ116, LS-AZ129 and LS-AZ130, each with a single 35 mm faucet hole and a back side overflow.
