The ANZZI LS-AZ336 Admiral is a 17" handmade copper vessel sink in polished antique copper with a floral design interior.
Handmade Copper, About 17" Across
The bowl measures about 17" by 17" and 5.875" high; every unit in this series is handmade by a skilled artisan, so color, texture and size vary slightly from unit to unit and the measurements are an approximation.
All ANZZI Admiral bath sinks are handcrafted using only RHINO ALLOY certified artisan copper. Each piece is fully handmade from start to finish in one piece construction.
A push drain is included with the sink. As a top-mount vessel, the copper bowl sits on the counter over a single drain hole.
Installing the LS-AZ336 on the Counter
ANZZI's vessel sink installation manual for this sink opens with three checks: read the whole instruction sheet first, observe all local building and safety codes, and inspect the sink as soon as it arrives, reporting any damage to ANZZI's customer service center right away. The tools and materials it lists are silicone sealant (for copper sinks, a neutral curing silicone sealant), a damp cloth, a basin wrench and thread sealant.
Choosing a Faucet for a 5.875" Bowl
ANZZI's own vessel sink faucets include the Crown L-AZ022, with an 8" spout height and a 5.54" reach, and the Enti L-AZ096, which stands 8.87" tall with a 6.02" reach; both are single lever, 1.2 GPM faucets according to their pages.
The LS-AZ336 is an ANZZI 17" handmade copper vessel sink in polished antique copper, with a floral design interior and a push drain in the box.
Features
Handmade From Start to Finish
Every Admiral piece is fully handmade from start to finish, so color, shape and finish vary slightly from sink to sink.
Floral Design Interior
The Admiral carries a floral design interior, as listed on ANZZI's page for the LS-AZ336.
RHINO ALLOY Certified Copper
ANZZI crafts the Admiral from what it calls RHINO ALLOY certified artisan copper, in polished antique copper.
One Piece Construction
The bowl is one piece construction, formed as a single handmade copper piece rather than assembled sections.
Push Drain Included
ANZZI includes a push drain with the sink, packed in the same box as the handmade copper bowl.
Top Mount Over One Drain Hole
ANZZI's installation manual sets the sink on a continuous bead of silicone over a 2" drain hole and lets it dry for 24 hours.
Pairs With ANZZI Vessel Faucets
ANZZI's Crown L-AZ022 (8" spout height, 5.54" reach) and Enti L-AZ096 (8.87" tall, 6.02" reach) are vessel sink faucets that stand taller than this 5.875" bowl; a wall-mount faucet set above the rim is the other route.
Soap and Hot Water Care
Clean with regular soap and hot water and a non-abrasive cloth or sponge, test any stronger cleaner first and never let it soak.
Specifications
-
Model: LS-AZ336
-
Dimensions: 17" x 17" x 5.875" H (approximate, handmade)
-
Material: Copper (ANZZI RHINO ALLOY certified), handmade
-
Finish: Polished antique copper
-
Design: Floral design interior
-
Construction: One piece
-
Mounting: Top mount (vessel)
-
Drain: Push drain included
-
Series: Admiral
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- LS-AZ336 Admiral handmade copper vessel sink
- Push drain
Installation & Care
Installation
Top mount on the counter over a single drain hole. From ANZZI's vessel sink installation manual: observe local building and safety codes and inspect the sink on arrival. Place it upside down on a soft cloth, run a continuous bead of silicone (neutral curing silicone sealant for copper) around the base, turn it over and position it over the 2" drain hole, wipe off excess with a damp cloth and let the silicone dry for 24 hours. For the drain, strip the drain body of its tail piece, gaskets, friction washer and lock nut, reattach the tail piece with thread sealant and slide the flat rubber gasket up to the drain body, where it seals the drain flange to the sink. Then fit the tapered rubber gasket and friction washer underneath, hand-tighten the lock nut and finish with a basin wrench. The manual recommends consulting a professional if you are unfamiliar with this type of installation.
Care
Per ANZZI's care guide: clean regularly with regular soap and hot water and a non-abrasive cloth or sponge. Test any stronger cleaner on an inconspicuous area first, wipe and rinse the surface completely with water right after, rinse and dry any overspray, and do not allow the cleaner to soak. On the copper, also avoid abrasive pads.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Anchor LS-AZ340 is ANZZI's handmade copper vessel with a floral design exterior and a polished smooth interior, at about 15.75" across and 5.25" high.
