The Unger HydroPower Nano Complete Pro Kit comes in 2 versions: 39' or 55' reach. Pick your options above to open the exact model, with its own price and details. The details below are for the 39' version.
The Unger HydroPower Nano Complete Pro 39' Kit (NAN39) is a complete pure water window cleaning setup for professionals who clean multi story glass from the ground. The Unger HydroPower Nano 39' kit pairs the HydroPower Nano Pure Water System (NANOC) with nLITE Carbon 24K main and extension poles for a 39' reach, plus a flagged 11" nLITE Power Brush, angle adapter, water flow regulator, DuroFlex hose and carrying bag, so upper floor windows can be cleaned without ladders or scaffolding.
Hybrid Nano and DI Pure Water
The HydroPower Nano treats tap water in three stages. A combi pre-filter removes the largest impurities and chlorine to protect the membrane, a 40" large pore nano membrane removes up to 90% of the minerals, and the HydroPower Ultra DI resin unit removes the rest. The system delivers up to 1.5 gal/min (5.68 l/min) of pure water at 60 PSI, and a digital TDS meter at the outlet shows water quality as you work; 0 is the target and a reading of 10 or more means the resin is due.
The Nano runs entirely on water pressure, so there is no generator or outlet to find on site. It needs at least 44 PSI (3 bar) at the inlet and operates up to 90 PSI (6 bar). A Flow Optimizer Dial switches between PURE, BLEND and FLUSH modes, and Unger states that balancing pressure and resin usage with the dial extends resin life up to four times. The unit measures 25.5" x 19" x 47.5", weighs 66 lb empty and rolls on large wheels over uneven ground.
Carbon 24K Poles to 39'
Reach comes from two nLITE Carbon 24K poles in orange and black: a main pole (CF86G, 66" long, 4.2 lb) and an extension (CF33G, 71" long, 1.9 lb), joined by the nLITE Master/Extension Connection (NLHCC). Carbon 24K keeps the poles strong yet light for long days of pole work. At the top, the carbon fiber nLITE Gen 2 Angle Adapter (NGS15) sets the flagged nLITE Power Brush (NFK28), with 11" of nylon bristles, at a working angle to the glass.
The nLITE Water Flow Regulator (NLWVI) controls the pure water at the pole, and the green DuroFlex hose (DLS25) carries it from the Nano to the brush. The nLITE Carrying Bag (NLBAG) holds the poles between jobs.
Where the 39' Kit Fits
Unger lists large commercial buildings with multi story windows, shopping malls with extensive glass facades, schools and public buildings with hard to reach windows, and airports and transportation hubs with high, elevated windows as typical sites. In areas with high TDS tap water, the Unger HydroPower Nano 39' kit brings the membrane, resin, poles and brush together in one water fed pole system.
Features
Complete Kit, Ready for Pole Work
NAN39 combines the HydroPower Nano system with Carbon 24K poles, brush, adapter, regulator, hose and bag. Everything needed for water fed pole cleaning to 39' comes together.
39' Reach with Carbon 24K Poles
A main pole (CF86G) and an extension pole (CF33G) in Carbon 24K connect through the nLITE Master/Extension Connection. The carbon keeps the poles strong while staying light.
Three Stage Hybrid Filtration
A pre-filter, a 40" nano membrane and HydroPower Ultra DI resin purify tap water. The membrane removes up to 90% of the minerals before the resin.
Up to 1.5 gal/min at 60 PSI
The Nano produces up to 1.5 gal/min (5.68 l/min) of pure water. That supply runs straight up the DuroFlex hose to the brush.
Flow Optimizer Dial
PURE, BLEND and FLUSH modes balance pressure against resin use. Unger states this extends resin life up to four times.
No Power Required
The system runs on water pressure alone, from 44 PSI (3 bar) up to 90 PSI (6 bar). No electrical connection is needed on site.
Flagged 11" Power Brush
The nLITE Power Brush (NFK28) has 11" of flagged nylon bristles. The Gen 2 Angle Adapter sets it at a working angle to the glass.
Built In TDS Monitoring
A digital TDS meter reads the water at the outlet. Replace the resin when it shows 10 or more.
Specifications
-
Brand: Unger
-
Model: NAN39
-
UPC: 761475672245
-
System type: Hybrid nanofiltration and deionization, 3 stage
-
Reach: 39'
-
Pure water output: Up to 1.5 gal/min (5.68 l/min) at 60 PSI
-
Power: None required; runs on water pressure
-
Input pressure: Minimum 44 PSI (3 bar), maximum operating 90 PSI (6 bar)
-
Maximum water temperature: 85°F (30°C)
-
Nano system (NANOC): 25.5" L x 19" W x 47.5" H, 66 lb empty, stainless steel, black
-
Main pole (CF86G): nLITE Carbon 24K, 66" L, 4.2 lb, orange/black
-
Extension pole (CF33G): nLITE Carbon 24K, 71" L, 1.9 lb, orange/black
-
Connection (NLHCC): nLITE Master/Extension Connection, carbon, 16.8" L, 0.9 lb
-
Angle adapter (NGS15): nLITE Gen 2, carbon fiber, 11" L, 0.4 lb
-
Brush (NFK28): nLITE Power Brush Complete, flagged, 11", nylon bristles, 0.8 lb, green
-
Water flow regulator (NLWVI): Plastic, 0.1 lb
-
Carrying bag (NLBAG): 75.4" L, 6.4 lb, black/green
-
Hose (DLS25): DuroFlex, green, 984" (82')
-
Warranty: Unger Limited Lifetime Commercial Warranty (original purchaser, authorized reseller)
What's Included
- HydroPower Nano Pure Water System (NANOC)
- nLITE Carbon 24K Pole (CF86G)
- nLITE Carbon 24K Pole (CF33G)
- nLITE Master/Extension Connection (NLHCC)
- nLITE Gen 2 Angle Adapter (NGS15)
- nLITE Power Brush Complete, flagged (NFK28)
- nLITE Water Flow Regulator (NLWVI)
- nLITE Carrying Bag (NLBAG)
- DuroFlex Hose (DLS25)
Installation & Care
Installation
To start the Nano when new, turn the concentrate valve to WORK, set the Flow Optimizer Dial to PURE and run the system for at least 10 minutes to saturate the membrane; the pre-filter housing must fill completely with water. For daily use, connect the tap water inlet hose and the DuroFlex hose to the outlet. Join the CF86G main pole and CF33G extension with the NLHCC connection, fit the NGS15 angle adapter and the NFK28 brush at the top, and set the flow with the NLWVI regulator. For transport, remove the front hoses and connect the concentrate hose to the upper inlet to avoid spills.
Care
Clean the Nano of dirt after each use and depressurize it before maintenance. Use only water of known drinking quality, no warmer than 85°F. Replace the resin when the TDS meter reads 10 or more, the combi pre-filter (PFCRN) after approximately 8,000 gallons (30,000 l), and the membrane (NAMEM) every 3 to 5 years with proper care. Before storage or more than 14 days without use, treat the membrane with one 1 L bottle of Membrane Maintenance Liquid (ROMML). Store the poles in the carrying bag.
Resources
Shipping, Returns & Warranty
You'll get tracking by email as soon as this item ships. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Unger products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, and a restocking fee of up to 20% may be deducted along with payment processing fees. Used items and special-order items can't be returned.
Unger covers this product with its Limited Lifetime Commercial Warranty for the original purchaser when it is bought from an authorized Unger reseller, as My Clean Supplies is. If the product has a defect in materials or workmanship, Unger will, at its option, replace or refund the product or the defective part free of charge. Unger defines lifetime as the reasonably expected useful life of the product under normal commercial use. Consumable items that need routine replacement, such as squeegee rubber, scraper blades, microfiber cloths, mop pads, resin, filters, membranes and cleaning solution, are not covered. Keep your proof of purchase.
About Unger
Unger was founded in 1964 by Henry Unger, a working window cleaner who set out to make the tools commercial cleaners use every day easier, more efficient and safer to work with. Unger Enterprises, LLC runs its US business from Bridgeport, Connecticut, and its professional range covers outdoor and indoor window cleaning, pure water window cleaning systems, dusting and high access cleaning, floor care and mopping, restroom cleaning and litter removal tools.
The Complete Pro 39' Kit is the Carbon 24K version of Unger's HydroPower Nano kits; the HydroPower Nano Complete Pro 55' Kit adds HiFlo nLite HiMod carbon poles for more height, and the HydroPower Nano Pure Water System is sold on its own. Unger's HydroPower Ultra 16K Entry Kits at 33' and 40' and the nLITE Carbon 16K Starter Kits round out the range, along with the nLITE DuroFlex High Performance Hose.
