The Unger HydroPower Ultra Professional Kit 55' (UHPK4) is a high reach pure water window cleaning system for professionals working on multi story buildings. The Unger HydroPower Ultra Professional 55' kit combines the HydroPower Ultra large tank (UHP3C) on its cart with HiFlo nLite HiMod carbon poles that extend up to 55', an unflagged 11" nLITE Power Brush, an nLITE Gen 1 Angle Adapter, a water flow regulator, a DuroFlex hose and a HiFlo nLite carrying bag, so high windows are cleaned safely from ground level without ladders or scaffolding.
Large Tank with FloWater Technology
The UHP3C large tank deionizes tap water in three stages of mixed bed ion exchange resin: one green Ultra Resin Pack in the top position over two red packs. FloWater Technology optimizes the water flow through the tank for better resin saturation, and Unger states the system provides up to 30% more pure water output per resin pack, which means less downtime for resin changes. Glass is cleaned with pure water alone, with no chemicals.
A built in TDS meter shows water quality in real time, and the resin is due for a change at 10 ppm. Unger's production estimate for the three stage tank, based on 39 gal/h and a TDS of 10 as the limit, is more than 1,600 gal in soft water (under 100 TDS), 1,050 to 1,600 gal in medium water and 350 to 1,050 gal in hard water (250 to 400 TDS). The tank comes with a cart for transport and setup on large jobsites, measures 39.8" x 21" x 27" and weighs 76.8 lb. It operates up to 116 psi (8 bar) with inflowing water no warmer than 86°F.
HiMod Carbon Poles to 55'
The pole set is made of black HiFlo nLite HiMod carbon: one 264" section (UC67G, 3.6 lb) and three 132" sections (UC35G, 1.9 lb each), together reaching up to 55'. At the top, the carbon fiber nLITE Gen 1 Angle Adapter (NGC30, 24.4" long) holds the nLITE Power Brush Complete (NUK28), which has 11" of unflagged gray nylon bristles.
The nLITE Water Flow Regulator (NLWVI) sets the flow at the pole, the green DuroFlex hose (DLS25) runs 82' of pure water from the cart, and the black nylon HiFlo nLite Carrying Bag (NLBA1) keeps the pole sections together.
For Large Commercial Glass
Unger lists large commercial buildings with multi story windows, shopping malls with extensive glass facades, schools and public buildings with hard to reach windows, and airports and transportation hubs with high, elevated windows as typical sites. For crews who need both 55' of reach and the capacity of the large three pack tank, the Unger HydroPower Ultra Professional 55' kit puts the full pure water setup on one cart.
Features
55' Reach with HiMod Carbon
One 264" UC67G section and three 132" UC35G sections extend up to 55'. High windows are cleaned safely from ground level.
30% More Pure Water per Pack
Unger states the system gives up to 30% more pure water output per resin pack. Resin changes and downtime come less often.
FloWater Technology
Optimized flow through the tank improves resin saturation. Running costs stay lower over time.
Large Tank on a Cart
The UHP3C tank holds three resin packs and comes with a cart. It is easy to move and set up on large jobsites.
Built In TDS Meter
Real time readings confirm the water going to the glass. Change the resin at 10 ppm.
Gen 1 Angle Adapter and 11" Brush
The carbon fiber NGC30 adapter holds the unflagged NUK28 Power Brush. Its 11" of nylon bristles scrub while pure water rinses.
Chemical Free Cleaning
Three stages of mixed bed DI resin strip the minerals from tap water for high rise window cleaning. Pure water alone does the job, with no detergent residue left to streak.
Specifications
-
Brand: Unger
-
Model: UHPK4
-
UPC: 761475658102
-
System type: Deionization (mixed bed DI resin), 3 stage large tank
-
Pole reach: Up to 55'
-
Tank (UHP3C): HydroPower Ultra large tank on cart, 39.8" L x 21" W x 27" H, 76.8 lb, aluminum/plastic, black/green
-
Resin: 3 Ultra Resin Packs (1 green top, 2 red); replace at 10 ppm
-
Maximum operating pressure: 116 psi (8 bar)
-
Maximum water temperature: 86°F
-
Pole section (UC67G): HiFlo nLite HiMod carbon, 264" L, 3.6 lb, black, qty 1
-
Pole sections (UC35G): HiFlo nLite HiMod carbon, 132" L, 1.9 lb each, black, qty 3
-
Angle adapter (NGC30): nLITE Gen 1, carbon fiber, 24.4" L, 0.7 lb
-
Brush (NUK28): nLITE Power Brush Complete, unflagged, 11", nylon bristles, 0.8 lb, gray
-
Water flow regulator (NLWVI): Plastic, 0.1 lb
-
Hose (DLS25): DuroFlex, green, 82'
-
Carrying bag (NLBA1): HiFlo nLite, nylon, 80" L, 5 lb, black
-
Warranty: Unger Limited Lifetime Commercial Warranty (original purchaser, authorized reseller)
What's Included
- HydroPower Ultra large tank with cart (UHP3C) and 3 Ultra Resin Packs
- HiFlo nLite HiMod Carbon Pole (UC67G), 1
- HiFlo nLite HiMod Carbon Poles (UC35G), 3
- nLITE Power Brush Complete, unflagged (NUK28)
- HiFlo nLite Carrying Bag (NLBA1)
- nLITE Gen 1 Angle Adapter (NGC30)
- DuroFlex Hose (DLS25)
- nLITE Water Flow Regulator (NLWVI)
Installation & Care
Installation
Check that the green pack sits in the top position over the two red packs. Connect the DuroFlex hose to the Water OUT connection and the tap water supply to the Water IN connection, open the supply, and hold the yellow lever down with Water OUT open to bleed trapped air. Do not exceed 116 psi (8 bar). Assemble the HiMod pole sections to the height needed, fit the NGC30 angle adapter and NUK28 brush at the top, and set the flow with the NLWVI regulator.
Care
Change the resin when the TDS meter reads 10 ppm, refilling with one green pack on top and two red packs (UHPR3). Use only drinking (tap) water no warmer than 86°F, keep the tank away from heat sources and direct sunlight, and protect it from frost. Turn off the water supply when not in use, secure the cart in the vehicle for transport, and keep the pole sections in the carrying bag.
Resources
Shipping, Returns & Warranty
You'll get tracking by email as soon as this item ships. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Unger products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, and a restocking fee of up to 20% may be deducted along with payment processing fees. Used items and special-order items can't be returned.
Unger covers this product with its Limited Lifetime Commercial Warranty for the original purchaser when it is bought from an authorized Unger reseller, as My Clean Supplies is. If the product has a defect in materials or workmanship, Unger will, at its option, replace or refund the product or the defective part free of charge. Unger defines lifetime as the reasonably expected useful life of the product under normal commercial use. Consumable items that need routine replacement, such as squeegee rubber, scraper blades, microfiber cloths, mop pads, resin, filters, membranes and cleaning solution, are not covered. Keep your proof of purchase.
About Unger
Unger was founded in 1964 by Henry Unger, a working window cleaner who set out to make the tools commercial cleaners use every day easier, more efficient and safer to work with. Unger Enterprises, LLC runs its US business from Bridgeport, Connecticut, and its professional range covers outdoor and indoor window cleaning, pure water window cleaning systems, dusting and high access cleaning, floor care and mopping, restroom cleaning and litter removal tools.
The Professional 55' Kit is a Generation 1 nLITE kit with Unger's HydroPower Ultra large tank. Unger's Generation 2 kits include the HydroPower Ultra Entry Kit 20', the Advanced 39' Kit and the Large Carbon 39' Kit, and the HydroPower Nano Complete Pro 39' and 55' Kits add a nano membrane stage. Refill resin comes as HydroPower Ultra Resin Packs (UHPR3 for the large tank).
