The AlorAir GE3000TF pairs 3000 CFM of airflow with two washable intake filters that keep drywall dust, sawdust and debris out of the motor and fan. It is the GE3000 to choose for renovation drying and dusty job sites.
Like the GE3000T, it runs a 4/5 HP motor on 5.6 A, with a 3-hour shut-off timer, three speeds and five operating positions. The filters snap off for a rinse, and the 24.89 lb housing stacks with the rest of the fleet.
Features
Two Washable Intake Filters
Filters snap into both air inlets to keep debris and dust out of the motor and fan. Wash in warm soapy water and dry fully before refitting.
3000 CFM Centrifugal Blower
A 4/5 HP motor on 5.6 A drives up to 3000 CFM through a low outlet that sweeps air across wet floors and carpet.
3-Hour Timer
A dial timer counts down up to 180 minutes, then stops the unit. Set it to ON to run continuously.
Three Speeds
A rotary switch sets low, medium or high next to the timer dial.
Five Operating Positions
Runs flat, tilted 10° up or down, at 45° or straight up at 90° to dry floors, walls and ceilings.
20' Power Cord
Reaches outlets across a room without an extension cord, and wraps on the housing for storage.
Stackable Storage
Molded carry handles and a cord wrap on the housing; units stack on their sides up to four high.
Specifications
-
Model: GE3000TF
-
Airflow: 3000 CFM (maximum)
-
Speeds: 3
-
Operating Positions: 5 (0°, +10°, -10°, 45°, 90°)
-
Voltage: 115 V, 60 Hz
-
Rated Current: 5.6 A
-
Motor: 4/5 HP
-
Timer: 3-hour dial timer, or ON for continuous
-
Controls: Rotary speed switch and timer dial
-
Intake Filters: 2 washable filters (motor side and fan side)
-
Power Cord: 20'
-
Noise: 77 dB
-
Operating Temperature: 23°F to 160°F
-
Stackable: Up to 4 units, for storage
-
Dimensions: 16.06" x 14.02" x 17.24"
-
Weight: 24.89 lbs
-
Certifications: ETL, cETL
What's Included
- AlorAir GE3000TF air mover
- 2 washable intake filters (fitted)
- Owner's manual
Resources
Shipping, Returns & Warranty
Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused AlorAir equipment in its original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. Returns that aren't due to a defect carry AlorAir's 20% restocking fee, and you pay the return shipping. If the unit is defective, AlorAir covers the return shipping. Payment processing fees are not refunded. Used or contaminated units and special-order items can't be returned.
Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. Its air movers are built to be carried from job to job and work alongside AlorAir's restoration dehumidifiers.
The GE3000 series shares its housing with the GE2000 series (2000 CFM) but runs a larger motor, and sits below the GE4000 series (4000 CFM). The GE3000T is the base model, the GE3000TF adds intake filters, the GE3000HTC adds wheels and a carpet clamp, and the GE3000HCW adds a digital panel with app control.
