The AlorAir Storm Ultra is an app-controlled upright dehumidifier for water damage restoration and large basements. It removes 90 pints a day at AHAM conditions (80°F, 60% RH) and up to 190 pints a day at saturation (90°F, 90% RH), moving 210 CFM on 5.6 A across spaces up to 2,600ft².
Every Storm Ultra connects to the AlorAir app, so you can watch a drying job and change the setpoint from your phone. A heavy-duty pump, a 6" duct outlet and two large-diameter wheels make the Storm Ultra practical to set up on a new site each week.
Features
90 Pints a Day at AHAM
Up to 190 pints a day at saturation, from a 210 CFM airflow at 2.85 L/kWh, for spaces up to 2,600ft².
AlorAir App Control on Every Color
Connect directly or over WiFi to follow readings and adjust settings remotely.
Heavy-Duty Condensate Pump
Drains through the included hose on a quick connection; the line can rise up to 15' to the final drain.
6" Ducted Discharge
Fit flex or lay-flat duct to condition an adjacent room or target one area.
GPP at Inlet and Outlet
The LCD shows temperature, humidity and grains per pound at both ends, with job and lifetime hours.
Two-Stage Filtration
A washable pre-filter plus a replaceable MERV-8 filter.
Memory Restart and Auto Defrost
Resumes its last settings after a power cut and clears coil ice in cool spaces.
Rolls on Large Wheels
21.2" x 22" x 38" and 99.2 lbs, with a rigid handle and a cable and hose wrap.
Specifications
-
Model: Storm Ultra (New Version, WiFi)
-
Water Removal at AHAM (80°F, 60% RH): 90 pints/day
-
Water Removal at Saturation (90°F, 90% RH): 190 pints/day
-
Coverage: Up to 2,600ft²
-
Airflow: 210 CFM
-
Operating Temperature: 33.8°F to 105°F
-
Humidity Setpoint Range: 25% to 80% in 5% steps, plus continuous mode
-
Drainage: Built-in condensate pump, vertical rise up to 15'
-
Duct Connection: 6" discharge, flex or lay-flat duct
-
Power: 115 V, 60 Hz, 5.6 A
-
Electrical Requirement: Grounded 3-prong GFI outlet, 15 A time-delay fuse or breaker
-
Power Cord: 18'
-
Efficiency: 2.85 L/kWh
-
Filter: Pre-filter and MERV-8
-
Noise: 58 dBA or less
-
Dimensions: 21.2"L x 22"W x 38"H
-
Weight: 99.2 lbs (45 kg)
-
Certifications: cETL
What's Included
- AlorAir Storm Ultra dehumidifier
- Pre-filter
- MERV-8 filter
- Drain hose
- Power cord
- User manual
Setup & Placement
Stand the unit upright on a level floor, with the inlet and outlet clear of walls and obstructions. If it was transported lying down, stand it upright for at least 30 minutes before switching on.
Attach the included drain line to the quick connection on the base and run it to a drain or outside, rising no more than 15'. To duct it, fit 6" flex or lay-flat duct to the discharge. Plug into a grounded 3-prong GFI outlet on a 15 A circuit.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. The Storm series is its portable line for contractors who move equipment between job sites.
The Storm Pro uses the same upright body at 85 pints a day, the Storm Elite steps up to 125 pints with 12" duct connections, and the Storm 80X and Storm DP cover 80 and 50 pints a day in smaller uprights. The low-profile LGR 850 and LGR 1250 suit crews that stack units in a van.
