Ebac LD82 Lumber Dryer

The Ebac LD82 Lumber Dryer is a compact dehumidifier kiln for small cabinet makers, hobbyists, and craftspeople who want to dry their own timber. Installed in an insulated drying chamber and paired with the included STC1 Controller, it dries wood gently from green or air-dried stock down to as low as 6% moisture content. A powerful centrifugal fan prevents temperature layering across the stack, and low-temperature operation minimizes checking, splitting, and other degrade, so you can dry mixed species and thicknesses together. Once set up, the LD82 runs automatically and economically, using roughly 1 kW every three hours of continuous running.

What's Included:

• Ebac LD82 Lumber Dryer Unit
• STC1 Controller (proportional timer & thermostat)
• Owner's Manual
• PVC Tubing (16 mm I/D, approx. 10 ft.)
• Jubilee (Hose) Clip

Features

Dries to 6% Moisture Content
Takes timber from green or air-dried down to as low as 6% MC when required.

Gentle Low-Temperature Drying
Low operating temperatures minimize wood degrade such as checking and splitting.

Mixed Species & Thicknesses
Dry different species and board thicknesses together without degrade.

Powerful Centrifugal Fan
Circulates air through the stack to prevent temperature layering and promote even drying.

STC1 Controller Included
Proportional timer controls the drying cycle and a thermostat controls heating for automatic operation.

Automatic, Economical Operation
After initial setup the LD82 runs on its own, using approximately 1 kW per three hours of continuous running.

What's Included

Included with Your Purchase:

• Ebac LD82 Lumber Dryer Unit
• STC1 Controller (proportional timer & thermostat)
• Owner's Manual
• PVC Tubing (16 mm I/D, approx. 10 ft.)
• Jubilee (Hose) Clip

Specifications

• Product Type: Dehumidifier lumber/timber dryer (for use in an insulated drying chamber)
• Typical Load Capacity: 3 m³
• Target Moisture Content: Down to 6% MC
• Airflow: 460 CFM
• Maximum Operating Temperature: 113°F (45°C)
• Voltage: 110V, 1 Phase, 60 Hz
• Dryer Power: 320 W
• Heater Power: 350 W
• Maximum Amperage: 7 Amps
• Controller: STC1 (proportional timer & thermostat) included
• Dimensions (H x W x D): 24 in. x 12 in. x 22 in.
• Weight: 82 lbs.

FAQ

Q: Who is the LD82 for?
A: Small cabinet makers, hobbyists, and craftspeople who want to dry their own timber in an insulated chamber.

Q: How dry can it get the wood?
A: Down to as low as 6% moisture content, from green or air-dried stock.

Q: Does it include a controller?
A: Yes. The LD82 comes with the STC1 Controller for automatic timer and thermostat control.

Q: Can I dry different species together?
A: Yes. Its gentle low-temperature drying handles mixed species and board thicknesses without degrade.

Q: How much timber does it handle?
A: Typical loads of around 3 m³.

Q: Is it expensive to run?
A: No. It runs automatically using roughly 1 kW per three hours of continuous operation.

Resources

• Ebac LD82 Product Brochure
• Ebac LD82 Owner's Manual
• Ebac LD82 Spare Parts List
• Ebac LD82 Wiring Diagram