Ebac DD1200+ Industrial Desiccant Dehumidifier

The Ebac DD1200+ is the PLC-controlled, high-capacity version of Ebac's DD1200 industrial desiccant dehumidifier, engineered for the heaviest moisture removal in demanding industrial settings. Its 82% active silica gel rotor and high-capacity PTC heater dry the air by adsorption, working reliably in both low-temperature and low-humidity conditions. On its High Extraction setting it removes up to 562 pints per day at 27°C / 60% RH and operates from -4°F to 104°F. The durable stainless steel cabinet suits flood restoration, cold storage, food processing and manufacturing.

As a plus unit it adds a fully PLC-based control system with filter cleanliness and belt tension monitoring, and it can interface with Ebac's Pre-Heat and Post-Cool energy-saving modules.

What's Included:

• Ebac DD1200+ Industrial Desiccant Dehumidifier
• PLC control system
• Process and regeneration air filters
• Owner's Manual

Features

PLC-Based Control System
The plus version replaces the standard control with a fully programmable PLC, giving precise control of the drying mode and simple integration into larger process systems.

Filter and Belt Monitoring
On-board filter cleanliness monitoring and drive belt tension monitoring flag maintenance needs before they affect performance.

Module Ready
Designed to interface with the Ebac (EIPL) energy-saving Pre-Heat and Post-Cool modules for reduced running costs and controlled air-off temperatures.

Advanced Desiccant Technology
A patented PPS rotor charged with 82% active silica gel adsorbs moisture without producing liquid water, so it keeps working well below freezing.

High Capacity PTC Heater
The PTC regeneration heater reaches full drying output immediately and holds it while the unit runs, with no refrigerant required.

Selectable Drying Modes
Choose High Extraction, Deep Drying, or High Efficiency to match output to the application.

Two EC Variable-Speed Fans
High-efficiency EC fans with variable speed make the unit easy to commission across a wide range of duct arrangements.

Stainless Steel Construction
The high-grade stainless steel body resists corrosion in the harshest environments.

Remote Humidistat Facility
An external humidistat can be connected for fully automatic humidity control.

High-Temperature Safety Cut-Outs
Built-in safety cut-outs protect the unit and the process air stream from over-temperature.

What's Included

Included with Your Purchase:

• Ebac DD1200+ Industrial Desiccant Dehumidifier
• PLC control system
• Process and regeneration air filters
• Owner's Manual

Specifications

• Type: Desiccant (adsorption) dehumidifier
• Commercial/Industrial Use: Warehouse, Water Damage Restoration, Cold Storage, Food Processing, Marine, Manufacturing
• High Extraction Setting: 562 pints/day @ 27°C / 60% RH
• High Efficiency Setting: 402 pints/day @ 27°C / 60% RH
• Deep Drying Setting: 508 pints/day @ 27°C / 60% RH
• Process Airflow (Maximum): 883 CFM
• Process Airflow (Standard): 705 CFM
• Regeneration Airflow: 195 CFM
• Process Air Duct Size: 8 in.
• Regeneration Air Duct Size: 6 in.
• Operating Temperature Range: -4°F to 104°F
• Desiccant: 82% active silica gel PPS rotor
• Heater: PTC regeneration heater
• Controls: PLC electronic control
• Fans: 2 EC high-efficiency, variable speed
• Filters: Process and regeneration air filters
• Humidistat: Remote humidistat facility
• Maximum Noise Level: 67 dB
• Voltage: 220-240V or 440-460V, 3-phase, 60 Hz
• Maximum Power: 11.8 kW (11800 W)
• Wiring Style: Hardwired
• Dimensions (H x W x D): 56 in. x 28 in. x 23 in.
• Weight: 200 lbs.
• Color: Red
• Warranty: 1-Year Limited

FAQ

Q: What is the extraction capacity of the DD1200+?
A: On its High Extraction setting the DD1200+ removes up to 562 pints per day at 27°C / 60% RH.

Q: What does the "plus" version add over the standard model?
A: The plus version uses a PLC-based control system with filter cleanliness and belt tension monitoring, and it can interface with the Ebac Pre-Heat and Post-Cool energy-saving modules.

Q: How cold can it operate?
A: Because it is a desiccant unit it does not produce liquid water and works effectively down to -4°F.

Q: Is the unit hardwired?
A: Yes, these three-phase units are designed for a hardwired electrical connection.

Q: Can it be ducted?
A: Yes, the process and regeneration air streams are both ductable.

Resources

• Ebac DD Series 220V Brochure
• Ebac DD Series 460V Brochure
• Ebac DD Series 220V Owner's Manual
• Ebac DD Series 460V Owner's Manual
• Ebac DD Series 220V Spare Parts List
• Ebac DD Series 460V Spare Parts List