Ebac PD150-D Industrial Pool & Spa Dehumidifier

The Ebac PD150-D Industrial Pool & Spa Dehumidifier delivers powerful, refrigerant-based moisture control for indoor pools, spas, and other high-humidity commercial spaces. It draws humid air across a cold evaporator coil to condense out moisture, then reheats the air before discharge, protecting your building from condensation, mold, mildew, and corrosion. Removing up to 170 pints of water per day, the PD150-D slots neatly between the Ebac PD120 (110 pints/day) and the PD200 / PD220-D (190 pints/day), making it the ideal mid-capacity choice. Its self-contained, ductable design and adjustable digital humidistat make it easy to install and set for reliable, energy-efficient operation.

What's Included:

• Ebac PD150-D Dehumidifier Unit
• Owner's Manual
• 6-Pin Plug
• 3/8 in. PVC Drain Tube (approx. 10 ft.)
• Jubilee (Hose) Clip

Features

High Moisture Removal
Removes up to 145 pints/day at 80°F / 60% RH and up to 170 pints/day at 80°F / 80% RH for demanding pool and spa environments.

Adjustable Digital Humidistat
On-board digital control lets you set and hold your target humidity while the unit cycles to conserve energy. A remote humidistat and remote touch panel are also available.

Two-Speed Centrifugal Fan
Choose low (586 CFM) or high (665 CFM) airflow to match the space and noise requirements.

Temperature-Sensitive Reverse-Cycle Defrost
Automatically clears frost from the coil for dependable performance in cooler conditions down to 33°F.

Self-Contained, Ductable Design
Operates freestanding or connected to ductwork so conditioned air can be delivered where it is needed.

Heat Recovery
Reclaims approximately 9,350 BTU, returning warmth to the room during dehumidification.

Rugged Epoxy-Coated Steel Case
Enclosed coils and a corrosion-resistant coated steel case stand up to humid pool-room conditions.

R32 Refrigerant
Uses lower-GWP R32 refrigerant for efficient moisture extraction.

What's Included

Included with Your Purchase:

• Ebac PD150-D Dehumidifier Unit
• Owner's Manual
• 6-Pin Plug
• 3/8 in. PVC Drain Tube (approx. 10 ft.)
• Jubilee (Hose) Clip

Specifications

• Pint Capacity (80°F / 60% RH): 145 pints per day
• Pint Capacity (80°F / 80% RH): 170 pints per day
• Application: Indoor pools & spas, wet rooms, commercial/industrial spaces
• Airflow (Low Speed): 586 CFM
• Airflow (High Speed): 665 CFM
• Number of Fan Speeds: 2
• Effective Volume: 15,892 cu. ft.
• Heat Recovery: 9,350 BTU
• Operating Temperature Range: 33°F to 95°F
• Voltage: 220V, 1 Phase, 60 Hz
• Maximum Amperage: 9 Amps
• Maximum Wattage: 1,900 W
• Refrigerant Type: R32
• Defrost System: Temperature-sensitive reverse-cycle automatic defrost
• Controls: Adjustable digital humidistat (remote humidistat / touch panel optional)
• Filter Type: Cartridge air filter
• Drain: Gravity drain, 1/2 in. O/D
• Ductable: Yes
• Dimensions (H x W x D): 17.5 in. x 27.5 in. x 26 in.
• Weight: 146 lbs.
• Noise Level: 69 dBA
• Warranty: 1-Year Unconditional; 3-Year on Compressor, Condenser, and Evaporator

FAQ

Q: How much water can the PD150-D remove per day?
A: Up to 145 pints/day at 80°F / 60% RH and up to 170 pints/day at 80°F / 80% RH.

Q: Where does the PD150-D fit in Ebac's pool range?
A: It is the mid-capacity unit between the PD120 (110 pints/day) and the PD200 / PD220-D (190 pints/day).

Q: Can it be ducted?
A: Yes. The PD150-D is self-contained and ductable, so it can run freestanding or connected to ductwork.

Q: How does it drain?
A: It uses a gravity drain (1/2 in. O/D) and ships with a 3/8 in. PVC tube and hose clip for continuous drainage.

Q: Does it have automatic defrost?
A: Yes. A temperature-sensitive reverse-cycle defrost keeps the coil clear for reliable operation in cooler conditions.

Q: Are remote controls available?
A: Yes. A remote humidistat and a remote touch panel are available as optional accessories.

Resources

• Ebac PD150-D Product Brochure
• Ebac PD150-D Owner's Manual
• Ebac PD150-D Spare Parts List
• Ebac PD150-D Wiring Diagram
• Ebac PD150-D Wiring Schematic