Recent
Popular searches
Recent
Popular searches
Questions? Call for help
+1 (307) 429-4122
Mon to Fri, 9am to 5pm EST
Recent
Popular searches
Recent
Popular searches
Questions? Call for help
+1 (307) 429-4122
Mon to Fri, 9am to 5pm EST
Mytee's "Out of the Box" film on the A600 Modular Van Shelving System, the three-shelf unit built from polyethylene shelf supports joined by metal shelving tubes.
Watch it before installing. Assembled, the unit measures 9.25" x 39.25" x 52.25" and weighs 39 lb. You need a #3 Phillips screwdriver or bit, and the fasteners into the van depend on its design.
The A600 laid out flat: six polyethylene shelf supports, twelve metal shelving tubes, two floor mount brackets and two wall anchor brackets.
Each shelf takes two supports and four tubes, and the three shelves stack and screw together. Screws and washers come in the box, and the wall anchors fit the top or middle shelf, inside or outside the supports.
The assembled A600 holding gallon jugs, quart bottles and a parts bin, which shows the spacing between the three shelves. The bottles and bin are not included.
Polyethylene supports make it lighter than steel or aluminum shelving and keep it from rattling on the road. Two floor brackets and two wall anchors hold it in place, and you can set it up with the shelves you need.
Got Questions?
Find answers below or contact our support team.
Three stackable shelves.
9.25" x 39.25" x 52.25", and it weighs 39 lb.
A #3 Phillips screwdriver, or a drill with a #3 Phillips bit. Don't overtighten the screws.
Two floor brackets screw to the bottom shelf and two wall anchors attach to the top or middle shelf. Both are then screwed into the van; the fasteners for that depend on your van's design.
6 shelf supports, 12 metal shelving tubes, 2 floor mounts, 2 wall anchors, 24 #14 x 2" screws, 16 #14 x 1.25" screws and 40 1/4" flat washers.
No. Only the shelving system and its hardware are included.
Proud to Have Served















































