Skip to content

Authorized dealer for 12+ brandsReal people on the phone, Mon to Fri

Shop Now

AlorAir Sentinel HD90 90-Pint Crawl Space Dehumidifier

Original price $1,047.11 - Original price $1,047.11
Original price
$1,047.11
$1,047.11 - $1,047.11
Current price $1,047.11
Free shipping
Only 2 left
Arrives  
American Express Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa
Authorised dealer Factory-direct AlorAir
No sales tax Outside WY
30-day returns Unused, in the box
My Clean Supplies customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

Specifications

ModelSentinel HD90
Size and weight
Dimensions23.2"L x 15.2"W x 17.7"H
Weight67.2 lbs (30.5 kg)
Top and sink
DrainageGravity drain; A5/A6 terminals for an optional external condensate pump
Performance
CoverageUp to 2,600ft²
Airflow210 CFM
Operating Temperature33.8°F to 104°F
NoiseLess than 58 dBA
Power
Power115 V, 60 Hz, 5.56 A
Electrical RequirementGrounded 3-prong GFCI outlet, 15 A circuit
Install and warranty
CertificationscETL
Details
Water Removal at AHAM (80°F, 60% RH)90 pints/day
Water Removal at Saturation (90°F, 90% RH)198 pints/day
Water Removal at DOE (60°F, 60% RH)47.71 pints/day
Humidity Setpoint Range36% to 90%, plus continuous mode
Duct Connections6" supply adapter (standard); 12" return collar (optional)
Efficiency2.69 L/kWh
CompressorRotary
RefrigerantR32
FilterWashable pre-filter (MERV-8 optional)

Big crawl space capacity, gravity drained

The Sentinel HD90 removes 90 pints of water a day at AHAM conditions (80°F, 60% RH) and up to 198 pints at saturation (90°F, 90% RH), covering spaces up to 2,600ft² on a 5.56 A draw. A rotary compressor and 210 CFM of airflow do the work inside a 23.2" x 15.2" x 17.7" steel cabinet.

It drains by gravity only, so it suits a crawl space or basement with a floor drain, sump or outside run lower than the unit.

Humidistat control from 36% to 90%

Humidistat control from 36% to 90%

Set a humidity target anywhere from 36% to 90% and the built-in humidistat starts and stops the dehumidifier on its own. Drop the setpoint below 36% and it switches to continuous mode for drying out a wet space.

Automatic defrost keeps the coil clear down to 33.8°F, and memory restart brings the unit back on its last setting after a power cut, so it can run unattended under the house.

Gravity drainage, planned right

Gravity drainage, planned right

Condensate leaves the HD90 by gravity through its drain hose, so the line must run downhill to the drain with no loops or dips. AlorAir recommends moving to 3/4" PVC with a fall of at least 1" per 10' of run.

Where the drain sits above the unit, choose the Sentinel HDi90 with its built-in pump, or add an external condensate pump wired to the HD90's A5/A6 water-level terminals.

Got Questions?

Find answers below or contact our support team.

Does the Sentinel HD90 have a pump?

No. The HD90 drains by gravity, so the drain line has to slope down to a floor drain, sump or outside. If you need to push water up, the Sentinel HDi90 has a built-in pump, or you can add an external condensate pump that has its own power supply and a water level signal line for the A5/A6 terminals.

What is the lowest temperature it will run at?

The operating range is 33.8°F to 104°F, with automatic defrost for cool crawl spaces. Outside that range the unit stops and shows LO or HI until conditions come back into range.

Does it need a dedicated circuit?

It draws 5.56 A at 115 V. AlorAir asks for a grounded 3-prong GFCI outlet on a 15 A circuit, with no extension cord or plug adapter.

Can I duct it into a finished room?

Yes. The supply side takes 6" flex duct through the standard duct adapter, and a 12" return duct collar is available as an optional accessory. A common setup puts the unit in the unfinished side of a basement and ducts dry air into the finished side, with a passive return vent in the wall between them.

Can I control it from upstairs?

Yes, with AlorAir's optional wired remote control. It connects on a 25' CAT 5 cable and has its own humidity sensor, so you can read and adjust the unit from a living space or garage while it sits in the crawl space.

How do I maintain the filter and coils?

Slide the filter out, vacuum it or rinse it in warm water without soap, and let it dry fully before refitting. Once a year, clean the coils with a self-rinsing foaming coil cleaner. A MERV-8 filter is available as an upgrade.

Proud to Have Served