The ANZZI Suni 3-Handle Claw Foot Tub Faucet with Hand Shower comes in 3 versions: Matte Black, Brushed Nickel or Polished Chrome finish. Pick your options above to open the exact model, with its own price and details. The details below are for the Matte Black version.
The ANZZI FS-AZ0052BK is a Suni 3-handle floor-mounted tub filler with hand shower in matte black, made to stand beside a freestanding or claw foot bathtub. It is for a tub that sits away from the wall with no deck or wall to mount a faucet on: the filler rises from the floor on its own posts and arcs over the rim.
Three Handles, Two Outlets
Three handles share the work. One controls hot, one controls cold and the third is the diverter that sends the water to the tub filling spout or to the hand shower. The tub spout is powerful and the handheld sprayer is far reaching.
The filler stands on two posts that come up through a floor escutcheon.
Roughing In the Floor Supplies
The Suni has solid brass interior components under the matte black finish and is crafted for looks and built for reliability. Water pressure must be between 20 and 125 PSI; contact a professional plumber if you are having difficulties with the installation.
A freestanding tub faucet needs its plumbing planned before the floor is finished. The Suni's two supply points sit 7.9" apart, hot on the left post and cold on the right, and each needs a 1-1/8" hole through the floor with a 1/2" female-threaded supply line rising through it. Mark the faucet's centre point first so the spout faces the tub, then mark the two supply holes either side of it.
Before installation, check that all components are present, make sure all supply lines are free of debris with supply stops installed, and confirm water pressure is between 20 and 125 PSI. After the posts are connected, turn on the supplies and check the connections for leaks, then fit the hand shower and its hose with washers at each joint and turn the diverter handle to check the flow from both the spout and the hand shower.
For a claw foot or freestanding soaking tub, the FS-AZ0052BK is an ANZZI floor-mounted tub filler with hand shower, three-handle control and solid brass inside, finished in matte black.
Features
Floor-Mounted Freestanding Design
The filler stands on its own floor-mounted posts, made for a full sized freestanding or claw foot tub.
Three-Handle Control
Separate hot and cold handles set the bath temperature, and a third diverter handle switches between spout and hand shower.
Handheld Shower on a Hose
ANZZI's far-reaching handheld sprayer connects to the filler on its own hose, alongside the powerful tub filling spout.
1/2" Threaded Floor Supplies
The posts connect to 1/2" female-threaded supply lines set 7.9" apart, roughed in under the floor, and check valves and a restrictor valve come fitted as part of the assembly.
Solid Brass Interior
The Suni is crafted for looks and built for reliability, with solid brass interior components under the finish.
Matte Black Finish
Matte black is one of three finishes ANZZI offers for the Suni: matte black, brushed nickel and polished chrome.
Specifications
-
Model: FS-AZ0052BK
-
Material: Solid brass interior components
-
Finish: Matte Black
-
Installation: Floor mount, freestanding or claw foot tub
-
Handles: Three (hot, cold, diverter)
-
Hand Shower: Handheld with hose
-
Supply Connection: 1/2" male thread posts to 1/2" female-threaded floor supplies
-
Supply Spacing: 7.9" hot to cold
-
Floor Holes: 1-1/8" at each supply
-
Water Pressure: 20 to 125 PSI
-
Series: Suni
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- FS-AZ0052BK tub filler faucet in matte black with three handles and diverter
- Hand shower and hand shower hose
- Two posts, floor escutcheon, washers and nuts
- Check valves and restrictor valve
Installation & Care
Installation
Floor mounted. Mark the faucet center on the floor and the two supply points 7.9" apart, drill 1-1/8" holes, and bring up hot and cold supply lines with 1/2" female threads, hot on the left post and cold on the right. Fit the escutcheon and posts, secure the faucet with the nuts without over tightening, attach the hand shower and hose with washers, then run the spout and hand shower to check for leaks. Water pressure must be 20 to 125 PSI; ANZZI suggests a professional plumber if installation is difficult.
Care
To preserve the matte black finish, apply a non-abrasive wax such as car wax, and rinse off any cleaner immediately. Clean the flow regulator regularly to clear calcium build up or blockages that reduce flow.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Suni floor-mounted tub filler comes in matte black (FS-AZ0052BK), brushed nickel (FS-AZ0052BN) and polished chrome (FS-AZ0052CH). ANZZI's other floor-mount tub fillers include the Union, Yosemite, Victoria, Moray, Khone, Kase and Impala.
