The KPlunge CP-IFTUB Kodiak is a 1-person inflatable cold plunge tub sold on its own, without a chiller: a oval tub in PVC that inflates with a hand pump and packs into a carry bag. It is the easy way to start plunging at home or to take the plunge with you, filled with cold tap water, and it is ready for a chiller later through its standard inlet and outlet.
A 103 Gallon Oval Plunge
The oval tub holds 103 gallons (390 L) and measures 59.1" L x 35.6" W x 27.4" H (31.2" H with lid), with a gray exterior. It suits a longer plunge with room to stretch out, and a 59.1" x 35.6" oval footprint for a patio, garage or home gym. The PVC walls are 3.9" thick for insulation and stiffness, and the thick insulated lid fastens with child-safety clips when the tub is not in use.
Ice Today, a Chiller Later
When you add cooling, the tub outlet connects to the chiller inlet and the chiller outlet back to the tub inlet, with the supplied adapters bridging fittings that differ. The KPlunge Gale 3/4 HP or 1 HP chiller holds the water anywhere from 37°F to 104°F.
Starting with cold tap water keeps setup simple: the thermometer in the box tells you the water temperature, and the insulated lid keeps it steady between sessions. When you want the water held at a set point every day, the KPlunge Gale 3/4 HP (CP-CHILL08HP) or 1 HP (CP-CHILL1HP) chiller connects through the standard inlet and outlet.
Setup, Care and Storage
Setup takes no tools: lay down the ground mat, inflate the walls with the manual pump to 8 to 10 psi, close the drain and fill. Everything else is in the box, from the carry bag and non-slip floor mat to a thermometer, repair patches, two adapters and two drain plugs, and the tub works indoors or outdoors.
Care is light: drain, wash with warm soapy water and dry the tub every two weeks, check the air pressure now and then because temperature swings change it, and store it in the carry bag in a dry, shaded place. A puncture is a patch job with the repair kit and a PVC adhesive, followed by 24 hours before reinflating.
The Kodiak sits in the KPlunge inflatable range next to the Arctic Fox (CP-IFBAR), an 82-gallon round barrel for an upright plunge in a smaller footprint, and both are sold alone or with a Gale 3/4 HP or 1 HP chiller and heater. The KPlunge CP-IFTUB is a portable 103-gallon cold plunge that sets up without tools and packs away when you need the space back.
Features
Inflates in Minutes
The included manual pump and hose bring the Kodiak up to its recommended 8 to 10 psi, so it can be set up without tools and packed away again.
Thick Insulated Walls and Lid
PVC walls 3.9" thick and a thick insulated lid hold the water temperature between sessions, and child-safety clips keep the lid fastened.
103 Gallon Oval Tub
The oval tub holds 103 gallons (390 L) and measures 59.1" L x 35.6" W x 27.4" H (31.2" H with lid), made for a longer plunge with room to stretch out.
Complete Accessory Kit
A carry bag, ground mat, non-slip floor mat, thermometer, repair patches, two adapters and two drain plugs come in the box, so setup and storage need nothing extra.
Easy Draining
Bottom drain plugs and a drain tap let you empty the tub into a nearby drain or sink, which makes the two-weekly clean and dry quick.
Chiller Ready
A standard inlet and outlet with two adapters let the tub connect to the KPlunge Gale chiller or most other external chillers whenever you want to add cooling.
Specifications
-
Model: CP-IFTUB
-
Capacity: 1 person, 103 gallons (390 L)
-
Dimensions: 59.1" L x 35.6" W x 27.4" H; 31.2" H with lid
-
Shape: Oval tub
-
Wall Thickness: 3.9"
-
Material: PVC
-
Color: Gray
-
Inflation Pressure: 8 to 10 psi
-
Chiller: Not included; standard inlet and outlet
-
Use: Indoor or outdoor
-
Warranty: 1 year (cold plunge tub; register within 90 days)
What's Included
- Inflatable PVC cold plunge tub
- Thick insulated lid with child-safety clips
- Manual air pump and connection hose
- Carry bag
- Repair kit (patches)
- Adapters (2) and drain plugs (2)
- Ground mat
- Non-slip tub floor mat
- Thermometer
Sold separately: Chiller and water hoses, PVC repair adhesive
Installation & Care
Installation
Lay the ground mat on a flat, stable surface free of sharp objects or debris, spread the tub out and inflate it with the hand pump to 8 to 10 psi; do not overinflate. Close the drain valve before filling and fill until the water is above the tub outlet. Do not sit or stand on the inflatable walls. To add a chiller later, connect the tub outlet to the chiller inlet and the chiller outlet to the tub inlet, using the supplied adapters if needed, and keep phones, lamps and other electrical devices at least 5 ft from the chiller.
Care
Tub: before first use wash it with warm, soapy water, rinse and dry with a soft, clean cloth; avoid abrasive cleaners and high-pressure hoses. Every two weeks drain it, clean it the same way and dry it thoroughly. Check the air pressure regularly, since temperature swings change it, and reinflate as needed. Before deflating, drain and dry the tub completely, then store it in its carry bag in a dry, shaded place away from sharp objects and extreme temperatures. Patch any puncture with the repair kit and a PVC adhesive, and wait 24 hours before reinflating.
Resources
Shipping, Returns & Warranty
KPlunge ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused KPlunge products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
SaunaSpa warrants this cold plunge tub against defects in materials and workmanship under normal use for 1 year from the original date of purchase. Register it at saunaspa.com/register within 90 days of delivery; the warranty is void without registration. Follow all installation and operating instructions, use the product only as intended and keep your proof of purchase. Improper installation, misuse, abuse or neglect, unauthorized repairs or modifications, and failure to follow the maintenance instructions are not covered.
Warranty claims. Call SW Corp, the maker of KPlunge, at 866-588-8008 with your proof of purchase, the model number and a description of the problem. Register the product at saunaspa.com/register within 90 days of delivery. Contact us with your order number if you would like help with the claim.
About KPlunge
KPlunge makes cold plunge tubs, all-in-one chiller tubs, inflatable plunges and plunge chillers for home recovery. It is part of SW Corp in Miami, Florida, alongside SaunaSpa, SteamSpa, ANZZI and MediTub.
KPlunge inflatable plunges come in two shapes: the 82-gallon barrel-shaped Arctic Fox (CP-IFBAR) and the 103-gallon oval Kodiak (CP-IFTUB). Each is sold as a tub alone or bundled with the Gale chiller and heater in 3/4 HP (-08HP) or 1 HP (-1HP); the Gale is also sold on its own, and the cedar cold plunge and the all-in-one Iroquois and Borealis are the permanent options in the range.
