The ANZZI FT-AZ093 is the Trend Series 67" x 32" flat-bottom acrylic freestanding soaking tub in glossy white. Trend is a deep, generous soaker: 67" L x 31.5" W x 28.3" H, with 17.7" of soaking depth and a 79.26 gallon capacity, for a bather who wants both length and depth in one tub.
Length and Depth Together
Many soakers trade one for the other: long and shallow, or deep and short. Trend gives both. The 67" length lets you stretch out, the 28.3" sides make room for 17.7" of water, and the result is a bath where you can lie back and still have the water over your body.
That much water is the trade-off: 79.26 gallons is a large fill, so check that your water heater can supply it at bath temperature before you plan nightly soaks. The tall sides also mean a higher step in than a standard tub, so leave room beside it. In return you get a tub that suits two kinds of bather at once: the tall one who wants to stretch out and the one who wants to sit deep in the water.
Light Acrylic, Flat Bottom
Trend is acrylic in glossy white and weighs just 95 lbs empty, so it is easy to carry in and set despite its size. The flat bottom gives a steady footing when you stand to rinse or step out, and the glossy surface rinses clean with soap and water.
It is sold as the tub alone, so you choose the filler: a floor-mounted freestanding filler with a spout tall enough to clear the 28.3" rim, or a wall-mounted spout above it. Rough in the supply before the tub is set.
Pre-Plumbed With a Chrome Overflow
The Trend arrives pre-plumbed, with a built-in chrome overflow and a push-operated drain already fitted, so the installer does not assemble drain parts: the tub is leak tested, set, connected to the floor drain and leveled. The overflow carries water away below the rim, which is what lets you fill a deep soaker right up without watching the faucet, and the push drain opens and closes with a press. It is RHINO ALLOY certified to ANZZI's quality standard.
Because ANZZI water tests its tubs at the factory and ships the Trend pre-plumbed, install day comes down to two things: a floor that is level and strong enough, and a sound connection to the floor drain. ANZZI's install guide walks through both, including a 30 minute leak test before the tub is sealed in place.
For a long, deep soak in a light acrylic tub, the ANZZI FT-AZ093 Trend 67" freestanding tub gives 17.7" of depth and 79.26 gallons in glossy white.
Features
17.7" Soaking Depth
Trend gives 17.7" of soaking depth, so a seated bather sits low in the water for a deep, warm soak.
79.26 Gallon Capacity
The tub holds 79.26 gallons, a generous fill, so check that your water heater can supply a deep bath at temperature.
67" x 31.5" Footprint
At 67" L x 31.5" W x 28.3" H, Trend fits a primary bathroom or a generous hall bath with room for a freestanding tub.
Tall 28.3" Sides
The 28.3" height is what makes room for that depth, and it gives the tub a strong presence in the room.
Light 95 lbs Acrylic
The acrylic tub weighs 95 lbs empty, so it is easy to carry in and set, and its glossy white surface wipes clean.
Push Drain, Chrome Overflow
A push-operated drain and a built-in chrome overflow come fitted to the pre-plumbed tub, so the installer connects rather than assembles.
RHINO ALLOY Certified
Trend is RHINO ALLOY certified to ANZZI's quality standard, with a flat bottom for a steady footing.
Specifications
-
Model: FT-AZ093
-
Overall Dimensions: 67" L x 31.5" W x 28.3" H
-
Nominal Size: 67" x 32"
-
Soaking Depth: 17.7"
-
Water Capacity: 79.26 gallons
-
Tub Weight: 95 lbs
-
Material: Acrylic
-
Finish: Glossy White
-
Installation Type: Freestanding
-
Bottom: Flat
-
Drain: Push-operated, pre-installed
-
Overflow: Built-in, chrome
-
Plumbing: Pre-plumbed
-
Faucet: Not included
-
Series: Trend
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- ANZZI FT-AZ093 Trend freestanding bathtub
- Built-in chrome overflow and push-operated drain (pre-installed)
- Flexible drain hose for the pre-installation leak test
Sold separately: Tub filler, Permanent drain connection to the floor waste line
Installation & Care
Installation
Freestanding. Overall 67" L x 31.5" W x 28.3" H; the tub weighs 95 lbs empty and holds 79.26 gallons, so confirm the floor can carry it full with a bather, and rough in the filler supply before the tub is set. ANZZI water tests its tubs at the factory, and its install guide asks you to repeat the test before the tub is set for good: on a flat surface, close the drain, fill the tub about half way, wait 30 minutes and check every seal. Then trace the tub's position on the floor, mark where the drain falls, set the tub, connect the drain and level it with the adjustable feet; the guide notes that a tub that leaks is almost always one that is not level. The flexible drain in the box is for that test only, and the installer supplies the permanent drain connection. Finish with a bead of silicone around the base and give it 24 hours to set before the first bath.
Care
Clean the acrylic regularly with regular soap and hot water on a non-abrasive cloth or sponge, which stops soap scum and mineral deposits from building up into a film that is harder to remove. If you need a stronger cleaner, test it on an inconspicuous area first, wipe it on, then rinse the surface completely with water right away and dry any overspray on the floor or the faucet; never let a cleaner soak on the tub. Avoid scouring pads and powders, which dull a gloss finish.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this bathtub to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
Trend is a single-size 67" x 32" deep acrylic soaker. ANZZI's acrylic freestanding soakers cover many shapes and depths, from the 59" Britt to the deep 67" Eft, Maple, Prima, Trend and Zenith, the 68" Reginald and the 71" Ruby, plus Chand, Ami, Mone and Vault in more than one size, and the 65" Bank.
