ANZZI FT-AZ101 Heidi 67" x 34" Acrylic Combination 50 Gallon Capacity Freestanding Bathtub with Center Drain in White
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop NowRecent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The ANZZI FT-AZ101 is the Heidi Series 67" x 34" acrylic combination freestanding bathtub in white: a whirlpool and air tub with a center drain and a 50 gallon capacity. Heidi combines 12 water jets, 18 air bubble injectors, a maintenance heater and onboard aromatherapy in one freestanding shell, for anyone who wants a full massage bath at home rather than a plain soak.
Water Jets and Air Bubbles Together
Heidi is a combination tub, which means two separate massage systems. The whirlpool side uses 12 low-profile jets, 8 arranged in a V and 4 directional, driven by a 1 HP pump for a firm, targeted massage. The air side uses 18 air bubble massage injectors fed by a 1 HP air blower for a softer, all-over effervescence. Run either one, or both at once, with the raised easy-push buttons, and set the whirlpool pressure to suit.
ANZZI says the unit, powered by its 1 HP pump and 1 HP air blower, is safe to use with aromatic oils and bathing salts. The onboard aromatherapy system releases fragrance through the massage injectors; the scent canisters are sold separately, so you choose your own.
A Heater That Keeps the Bath Warm
A maintenance heater holds the water at a warm, comfortable temperature, so a long massage does not end in a cooling tub. That matters for a massage bath, which tends to run longer than a quick soak, and it saves draining and refilling hot water halfway through. For anyone who uses the tub to unwind after work or exercise, it is what makes a long, unhurried session practical.
Fiberglass-Reinforced Acrylic, IAPMO Listed
The shell is marine grade acrylic with fiberglass reinforcement, with a nonporous high-gloss surface that ANZZI says is easy to clean and resists fading and staining, finished in ultra white with polished chrome trim. A slight inset at the middle of each side adds a modern line. Heidi is IAPMO listed, the drain is centered with the pump on the left side, and a chrome pop-up drain is included.
It measures 67.125" L x 33.5" W x 24" H overall, with a 40" L x 19" W basin and an average 50 gallon fill, so it suits a primary bathroom with an electrical circuit run to the tub.
For a full massage bath with heat and aromatherapy, the ANZZI FT-AZ101 Heidi combination freestanding tub gives 12 water jets, 18 air injectors and a maintenance heater in fiberglass-reinforced acrylic.
12 Whirlpool Water Jets
Eight V-shaped and four directional low-profile jets, driven by a 1 HP pump, give a firm, targeted massage you can adjust with the whirlpool pressure controls.
18 Air Bubble Injectors
Eighteen air injectors on a 1 HP blower release streams of bubbles for a gentler, all-over massage.
Run Either System or Both
Raised easy-push buttons start the whirlpool, the air system or both, so the bath can be as gentle or as firm as you like.
Maintenance Heater
The built-in heater keeps the water warm through a long massage, so you are not topping up with hot water.
Aromatherapy System
Fragrance is released through the massage injectors; ANZZI says the tub is safe with aromatic oils and bath salts, and scent canisters are sold separately.
Fiberglass-Reinforced Acrylic
The nonporous high-gloss acrylic surface is easy to clean and resists fading and staining, with polished chrome trim.
IAPMO Listed, Pop-Up Drain
Heidi is IAPMO listed and comes with a chrome pop-up drain, with a center drain and left-side pump location.
67" x 34" Freestanding
At 67.125" L x 33.5" W x 24" H with a 50 gallon fill, it suits a primary bathroom with power run to the tub.
Sold separately: Aromatherapy scent canisters, Tub filler, Dedicated electrical circuits
Installation
Freestanding jetted tub. Overall 67.125" L x 33.5" W x 24" H. The tub is factory wired for 110V and needs a dedicated 20A GFCI breaker that supplies nothing else; because it carries a heater, the manual calls for an additional dedicated 15A breaker. Connections should be made by a licensed plumber and electrician, and the pump must stay reachable for service. Test the jets and plumbing before the installation is finished, and only run the pump with the water 2" over the jets. Level the tub on a floor that can carry it full, connect the drain to the floor waste line and seal the joint, and keep the pump side accessible.
Care
Clean the acrylic with mild soap or a mild detergent and a damp, non-abrasive cloth; the manual warns that abrasives dull or scratch acrylic and that oil based solvents must not be used. Per ANZZI's care guide, test any stronger cleaner on an inconspicuous area, rinse completely with water right after applying it and do not let it soak. Flush the jet system at least every 90 days by filling the tub, running the pump with a mild sanitizing solution and draining, and do not use bubble bath while the jets are running.
ANZZI ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this bathtub to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
Heidi is a single 67" x 34" combination tub. ANZZI's other jetted freestanding tubs include Heidi, Lori, Sofi, Leni, Julia and the stone resin Stone Bell.
Proud to Have Served



















































