The ANZZI LS-AZ913MB Ariadne is a 21.3" rectangle glass vessel sink in matte black, sold with a chrome pop-up drain, drain assembly and mounting hardware in the package. Its design pairs crisp clean lines with soft gentle curves in a matte black finish.
21.3" Rectangle Bowl, 4.7" Tall
The outer dimensions are 21.3" W x 16.1" D x 4.7" H and the inner dimensions are 20.35" W x 15.15" D x 4.23" H. The vessel mounts to the top of the vanity or countertop instead of into it, so the full 4.7" height stands above the counter; this frees up space in the cabinet below and on the countertop.
The bowl is built in sturdy one-piece construction from premium glass, finished in matte black. ANZZI adds a nano water coating, a protective water guard that it says fights soap and water stains.
ANZZI includes the chrome pop-up drain, together with the drain assembly and mounting hardware, and says the sink is ready to install right out of the box.
Installing the LS-AZ913MB
ANZZI's vessel sink installation manual for this sink opens with three checks: read the whole instruction sheet first, observe all local building and safety codes, and inspect the sink as soon as it arrives, reporting any damage to ANZZI's customer service center right away. The tools and materials it lists are silicone sealant, a damp cloth, a basin wrench and thread sealant.
Choosing a Faucet for a 4.7" Bowl
ANZZI's own vessel sink faucets include the Crown L-AZ022, with an 8" spout height and a 5.54" reach, and the Enti L-AZ096, which stands 8.87" tall with a 6.02" reach; both are single lever, 1.2 GPM faucets according to their pages.
For a vanity that suits matte black, the LS-AZ913MB is an ANZZI 21.3" rectangle glass vessel sink with 20.35" W x 15.15" D x 4.23" H of basin inside, one-piece premium glass with a nano water coating, and a chrome pop-up drain in the package.
Features
Matte Black Finish
ANZZI finishes this Ariadne premium glass bowl in Matte Black, the finish named in the LS-AZ913MB title and on its anzzi.com page.
Clean Lines, Gentle Curves
The Ariadne's design pairs crisp clean lines with soft gentle curves, in a 21.3" wide matte black rectangle.
One-Piece Premium Glass
ANZZI builds the Ariadne in sturdy one-piece construction from premium glass, so the bowl is a single piece with no joined sections.
Nano Water Coating
ANZZI applies a nano water coating, a protective water guard that it says fights soap and water stains on the glass.
Chrome Pop-Up Drain and Hardware Included
The package includes a chrome pop-up drain with its drain assembly and the mounting hardware, and the sink is ready to install right out of the box.
Mounts On Top, Frees Cabinet Space
The vessel mounts to the top of the vanity or countertop instead of into it, which frees up space in the cabinet below.
Professional Installation Recommended
ANZZI highly recommends professional installation; its manual sets the sink on silicone over a 2" drain hole with 24 hours of drying time.
Pairs With ANZZI Vessel Faucets
ANZZI's Crown L-AZ022 (8" spout height, 5.54" reach) and Enti L-AZ096 (8.87" tall, 6.02" reach) are vessel sink faucets that stand taller than this 4.7" bowl; a wall-mount faucet set above the rim is the other route.
Specifications
-
Model: LS-AZ913MB
-
Outer Dimensions: 21.3" W x 16.1" D x 4.7" H
-
Inner Dimensions: 20.35" W x 15.15" D x 4.23" H
-
Shape: Rectangle
-
Material: Premium glass, one-piece, nano water coated
-
Finish: Matte Black
-
Mounting: Top mount (vessel)
-
Drain: Chrome pop-up drain included
-
Hardware: Drain assembly and mounting hardware, in the package
-
Installation: Professional installation highly recommended
-
Series: Ariadne
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- LS-AZ913MB Ariadne glass vessel sink in matte black
- Chrome pop-up drain with drain assembly
- Mounting hardware
Installation & Care
Installation
Top mount on the counter over a single drain hole. From ANZZI's vessel sink installation manual: observe local building and safety codes and inspect the sink on arrival. Place it upside down on a soft cloth, run a continuous bead of silicone around the base, turn it over and position it over the 2" drain hole, wipe off excess with a damp cloth and let the silicone dry for 24 hours. For the drain, strip the drain body of its tail piece, gaskets, friction washer and lock nut, reattach the tail piece with thread sealant and slide the flat rubber gasket up to the drain body, where it seals the drain flange to the sink. Then fit the tapered rubber gasket and friction washer underneath, and the lock nut hand-tightened, then finished with a basin wrench. ANZZI highly recommends professional installation for this sink.
Care
Per ANZZI's care guide: clean regularly with regular soap and hot water and a non-abrasive cloth or sponge. Test any stronger cleaner on an inconspicuous area first, wipe and rinse the surface completely with water right after, rinse and dry any overspray, and do not allow the cleaner to soak.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
Other ANZZI premium glass vessel sinks with a chrome pop-up drain include the round Allegro LS-AZ907MB in matte black (16.5" diameter x 4.3" H) and the Amalfi series at 16.5" diameter x 5.7" H.
