Recent
Popular searches
Recent
Popular searches
Questions? Call for help
+1 (307) 429-4122
Mon to Fri, 9am to 5pm EST
Recent
Popular searches
Recent
Popular searches
Questions? Call for help
+1 (307) 429-4122
Mon to Fri, 9am to 5pm EST
The controller face carries a 3-digit display, up, down and enter buttons, a power button and an antenna that links it to the remote fob.
Set the flow from the keypad or from the fob. Lower settings stretch your pure water tank and battery, and the controller stops the pump when you close the valve at the pole.
On the back of the housing, the leads to the pump and the battery leave through a sealed cable gland and end in spade terminals for quick wiring.
Fit the correct inline fuse and observe battery polarity when you wire it. The controller is not waterproof, so mount it where water cannot pool on top of the housing.
The remote fob pairs with its controller and lets you raise or lower the flow, start and stop the delivery pump and run an auto-calibration.
Control from the pole saves repeated walks back to the van between windows. Charge the fob from a micro USB phone charger, and keep it out of water and direct sunlight.
Got Questions?
Find answers below or contact our support team.
The Tucker Digital Flow Controller with Antenna is the controller for the Tucker Fill N Go system, the DIY panel and Tucker 12V delivery pumps.
Yes. The Digital Flow Controller with Antenna comes with a fob, and replacement fobs are sold separately.
Lower flow conserves pure water and battery and lets water cascade down the glass when rinsing, so a tank lasts longer through the day.
No. Mount it where water cannot pool on top, and add a valve at the end of the on-board hose. Do not immerse the fob or leave it in direct sunlight.
Charge the fob from a micro USB phone charger. Its LEDs show when it needs charging.
Proud to Have Served















































