hepacart

A hard-wall vestibule for recessed 36" doorways that rolls in and seals magnetically. The AnteRoom 36 creates a temporary entry room at a 36" door...

A second door swings open when a bed or a large machine has to pass through the anteroom. The AnteRoom 48 Double Door pairs a main hinged door wit...

A rolling, hard-wall entry room that seals to a 48" doorway and adapts to most other door sizes. The AnteRoom 48 seals magnetically to the door fr...

More room inside the AnteRoom, added in 12" or 24" steps. An expander module couples to the back of an AnteRoom and deepens the vestibule, giving ...

The anteroom, the negative air machine and the duct to join them, ordered as one set. Choose the AnteRoom 36, 48 or 48 Double Door; the bundle add...

A 2' x 4' cable access panel you can leave in the ceiling over the rack. A full-size 24" x 48" CAP with a brush-sealed opening, rollers and a remo...

Pull cable through a drop ceiling without leaving the tile open. A 2' x 2' aluminum panel that lays in the ceiling grid, with a horsehair-sealed o...

Matched CAP sets for 2' x 4' tiles and mixed cabling jobs. Two combos pair a CAP Classic or CAP Fiber with a CAP Extend to fill a 2' x 4' tile, an...

The HEPACART cart format for lower-risk ceiling work, without the built-in air machine. A rolling, enclosed ceiling-access cart on four spring-loa...

Join two ECU4 units 5' apart into one enclosed airlock. A zip-in cuff envelope with four support trusses and eight corner post locks that bridges ...

Close off an entire corridor with the ECU4 as the way in. A Velcro-sealed flange that zips onto the ECU4 and extends to 120" high, 55" deep and 14...

A fresh envelope for every dirty job, on the ECU4 frame you already own. Four single-use containment envelopes that interchange with the reusable ...

An ECU4 frame set up for single-use envelopes from the first job. The Starter set pairs the ECU4 frame with four disposable envelopes; the ICRA ki...

The ECU4 on wheels, packaged with the accessories a mobile containment job needs. Five kits built around the same ECU4 unit, Mobile Platform and T...

Move a deployed ECU4 from tile to tile without taking it down. An aluminum platform on four non-marring casters with brakes that carries the ECU4 ...

A soft-sided containment room that sets up in minutes and folds into a service vehicle. The ECU4 pairs a collapsible aluminum frame with a reusabl...

Turn an ECU4 into an anteroom at a doorway, or seal it to a wall opening. A frameless flange that zips into the ECU4 in place of a wide cargo door...

Bring the negative air machine along when the ECU4 moves. A caddy that attaches to the ECU4 Mobile Platform so an external negative air machine is...

Containment that comes down to the floor, for flooring, tile and coring work. Four push-button actuators lower a foam-sealed aluminum enclosure on...

The 6" HEPA filter for the negative air machine inside a HEPACART cart. Double gasketed and scan-tested at the factory, it replaces the filter tha...

Push a button and the enclosure rises to the ceiling, with the negative air machine already on board. The HEPACART AutoLift pairs a built-in HEPA ...

Ceiling access in an occupied building, with the dust kept inside the cart. A rolling, fully enclosed work cart with its own HEPA negative air mac...

Tacky mats that live in the tray under the cart door, ready at every set-up. A pack of 60 peel-off walk-off sheets sized to the Clean Mat storage ...

Connects a DUSTBUGGY cart to an external negative air machine. The DUSTBUGGY has no built-in air machine; the Export Adaptor gives it a duct conne...