MediTub 2753WILWD 27" x 53" Fully Loaded Walk-In Bathtub with Whirlpool and Air Jets, Left Door and Drain, White
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop NowRecent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The MediTub 2753WILWD is a 27" x 53" fully loaded walk-in bathtub in white, with the door and drain on the left and a combined whirlpool and air massage system. It is built for bathers who want a safe, seated bath without climbing over a tub wall: the wide inward-swinging door opens to a 4.25" low entry threshold, and the molded seat sits 17.75" high with a 23" x 12.5" sitting area, so you sit down before the water goes in and stay seated through the soak.
Fully loaded means the 2753WILWD arrives with everything a walk-in tub can carry: 12 whirlpool jets, air jets, an inline heater, aromatherapy, chromatherapy lighting, a soft touch control console and a Quick Fill faucet with a handheld shower. It suits aging in place, an ADA bathroom remodel or any home where someone finds a standard step-over tub difficult.
Whirlpool, Air and Heat From One Console
Close the door and the Quick Fill waterfall filler fills the tub fast, through a thermostatic mixer with a 104°F safety lock, to a 33" soaking depth. 12 fully adjustable whirlpool jets give a targeted hydro massage, Acu-Stream air jets add a soft, total-body bubble massage, and the two run separately or together from the soft touch console, which also shows the water temperature. The inline maintenance heater works while the water jets run and slows the cooling of the bath, shutting off automatically at 113°F.
Aromatherapy scents the air bubbles with fragrance beads in the aroma cap, and chromatherapy lighting cycles through seven colors or holds the one you choose. When the soak is over, rinse off with the handheld Euro-Grip shower, which reaches 60" on its hose, without standing up.
Safety Built Into the Shell
Built-in Safe Reach grab bars, a slip-resistant textured floor and an ADA compliant built-in seat support you on the way in and out, with 3 grab bars placed around the tub. The door closes on a watertight pressure seal, and the polished chrome buttons, jets and hardware stand out against the glossy white finish.
The shell is glossy white marine grade acrylic reinforced with fiberglass on a freestanding steel support frame with adjustable leveling feet. The tub is ETL listed.
Built for a 60" Alcove Retrofit
Measured for the room, the MediTub 27" x 53" fully loaded walk-in bathtub is 52.5" L x 26.5" W x 40" H overall. The 7" matching extension kit is in the box and brings the tub to 60" L x 32" W x 40" H, so it fills a standard 60" alcove when it replaces an old bathtub. It connects to 1/2" IPS hot and cold supplies and a drain opening of at least 3", and it needs two dedicated 20 A GFCI circuits.
The fully loaded range comes in two 27" x 53" versions, the 2753FL and the 2753WI, each with the door and drain on the left or right, plus the 29" x 53" 2953WC wheelchair accessible tub.
In short, the MediTub 2753WILWD puts whirlpool and air massage, heat, light, scent and a fast-filling faucet into one 27" x 53" walk-in bathtub, so bathing at home stays safe, independent and relaxing.
Low 4.25" Entry Threshold
The wide inward-swinging door opens to a 4.25" low entry threshold, and the molded seat sits 17.75" high with a 23" x 12.5" sitting area, so nobody has to lift a leg over a tub wall.
Quick Fill Faucet Included
The Quick Fill waterfall filler fills the tub fast, and the handheld Euro-Grip shower on a 60" reach lets you rinse while seated.
Thermostatic 104°F Safety Lock
A thermostatic mixer holds the water temperature you set and locks at 104°F, so the fill cannot run too hot by mistake.
12 Whirlpool and Air Jets
12 fully adjustable whirlpool jets and Acu-Stream air jets combine a targeted hydro massage with a soft, total-body bubble massage.
Inline Maintenance Heater
The inline heater runs with the water jets and slows the cooling of the bath, then shuts off automatically once the water reaches 113°F.
Aromatherapy and Chromatherapy
Fragrance beads in the aroma cap scent the air bubbles, and the underwater light cycles through seven colors or holds one.
Soft Touch Control Console
One soft touch console runs the jets, heater and light and shows the water temperature, and it locks itself after a minute of no use.
Grab Bars and Textured Floor
Built-in Safe Reach grab bars, a slip-resistant textured floor and an ADA compliant seat give you support and secure footing in and out.
Fits a Standard 60" Alcove
The included 7" matching extension kit fills out a standard 60" bathtub alcove, so the tub can replace an existing step-over bathtub.
Reinforced Acrylic on Steel
Glossy white marine grade acrylic with fiberglass reinforcement rides on a freestanding steel frame with leveling feet that keep the door seal true.
Sold separately: Hot and cold supply lines and valves, Drain piping, Tile flange (the tub has none)
Installation
Door and drain on the left; overall 52.5" L x 26.5" W x 40" H. Position the tub so the hot and cold supplies and the drain hole line up with the layout drawings in the manual, flush the supply lines for one minute, then connect the red braided hose to hot and the blue to cold on 1/2" IPS male supplies; supply valves are recommended for maintenance. The drain opening must be at least 3", and the drain connects with UPC approved PVC glue and pipe. Electrical: AC 110V, 60 Hz on two 20 A single-pole breakers, with the circuit protected by a GFCI, wired by a qualified electrician to local codes. The 7" extension kit closes a 60" alcove. Level the tub on its feet with all of them touching the floor, water test it before it is enclosed, keep the motor access panel reachable, and lift it only by the frame handles. MediTub requires a licensed plumber and electrician; the installation manual is in Resources.
Care
Flush the jet piping before first use and monthly: fill with hot water 2" to 3" above the jets with 2 to 3 teaspoons of low-foaming dishwasher detergent, run the jets 10 minutes and drain, then refill with cold water, run 15 minutes and drain. Clean the suction cover of hair and lint monthly and never run the pump dry or without the cover. Clean the acrylic with soap, hot water and a non-abrasive cloth or sponge; test any stronger cleaner on a hidden spot first, rinse it off at once and never let it soak. Keep the bath at or below 102°F.
MediTub ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused MediTub products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
MediTub covers the bathtub shell, frame and finish for 10 years from the original purchase, and the motors, controls, waste and overflow, fittings and plated finishes for one year, with labor covered in the first 90 days; the door seal carries a lifetime warranty. Register the tub at swcorp.com/register within 90 days of delivery, have it installed by a licensed plumber, electrician or contractor, and report any damage within 5 business days of delivery. The warranty belongs to the original owner and does not cover water damage, misuse or improper installation.
Warranty claims. Call MediTub (SW Corp) at 866-633-4882 with your proof of purchase, the model number and a description of the problem; written notice goes by certified mail to 5701 NW 35 Avenue, Miami, FL 33142. Register the tub at swcorp.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
MediTub builds walk-in and wheelchair-accessible bathtubs for safe, independent bathing, with soaking, whirlpool, air and dual massage systems. It is part of SW Corp in Miami, Florida, the company behind ANZZI and SteamSpa.
The MediTub fully loaded 2753 walk-in tubs (2753FL and 2753WI) are 27" x 53" walk-in bathtubs in white with the door and drain on the left or right, supplied with whirlpool and air jets, an inline heater, aromatherapy, chromatherapy lighting, a soft-touch console, a Quick Fill faucet and a 7" extension kit.
Proud to Have Served



















































