AlorAir GE1000T 1000 CFM Air Mover with 3-Hour Timer
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The GE1000 series moves up to 1000 CFM from a 1/5 HP motor drawing 1.5 A, in a centrifugal housing that weighs 11.24 lbs. Air leaves through a low, wide outlet that sweeps across the floor, which is what dries carpet and hard floors quickly.
Place one unit in a corner of a small room, or one in each corner of a larger room so the airflow circulates around the space.
A built-in stand sets the housing flat, tilted 10° up or down, at 45° or straight up at 90°, so the same unit dries a floor, a wall or a ceiling. The rotary switch gives three speeds.
It works from 14°F to 122°F. Between jobs the cord wraps on the switch plate, and units stack on their sides, up to four high.
Got Questions?
Find answers below or contact our support team.
The blower is the same 1000 CFM unit. The A models add GFCI outlets with a reset button for daisy-chaining and have a 10' cord. The T models add a 3-hour timer. Models without an A have a 20' cord. The GE1000AT has both the outlets and the timer.
1.5 A at 115 V (1/5 HP). AlorAir specifies a GFCI protected outlet and warns against solid-state speed controllers.
AlorAir rates it at 68 dBA. Low speed is quieter for occupied rooms; high speed dries fastest.
Yes, on their sides with the air inlets lined up and each unit turned about 30°. AlorAir says no more than four high, and stacks are not secure in transit.
AlorAir lists an operating range of 14°F to 122°F. If it stops in extreme heat, turn it off, unplug it and let it cool.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}