AlorAir GE2000HCW 2000 CFM Air Mover with Wheels, WiFi and 18-Hour Timer
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The GE2000 series moves up to 2000 CFM from a 1/3 HP motor that draws just 2 A at 115 V. The low outlet sends air across the floor surface, where it speeds evaporation from wet carpet, pad and hardwood.
At 2 A, several units share a 15 A circuit, which matters when a restoration job needs a row of air movers along every wall.
Every model sits flat, tilts 10° up or down, or stands straight up at 90° to dry walls and ceilings, and the T and TF models add a 45° position. Three speeds let you run quietly in an occupied space or at full power on a job site.
AlorAir lists an operating range of 23°F to 160°F, and a 20' cord reaches outlets across a room.
A molded carry handle and a cord wrap on the housing make each unit quick to load and unload. At the shop, units stack on their sides with the inlets aligned, up to four high.
Stacks are for storage only. AlorAir notes they are not secure in transit, so load units individually in the van.
Got Questions?
Find answers below or contact our support team.
Each draws 2 A at 115 V, so several can share a 15 A circuit. Allow for anything else on the same circuit, and use GFCI protected outlets as AlorAir specifies.
The suffix letters mark the extras: T is a 3-hour timer, F adds two washable intake filters, C adds a carpet clamp, H adds a pull-out handle with wheels, and W adds a digital panel with an 18-hour timer and app control.
AlorAir rates the GE2000 series at 67 dB. Drop to low speed in occupied rooms.
On the GE2000T and GE2000TF, the dial timer counts down up to 3 hours, then shuts the unit off; set it to ON to run continuously. The GE2000HCW has a digital timer from 0 to 18 hours.
21.34 lbs for the GE2000T, 21.65 lbs for the GE2000TF and 24.29 lbs for the GE2000HCW with its wheel kit.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}