AlorAir GE4000HCW 4000 CFM Air Mover with Wheels, WiFi and 18-Hour Timer
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The GE4000 series is the largest of AlorAir's GE air movers, moving up to 4000 CFM from a 1 HP motor. On large open floors, warehouses and commercial losses, fewer units cover the same area.
It draws 9.4 A at 115 V, so give each unit its own 15 A circuit, or close to it, and plug into a GFCI protected outlet.
Beyond water damage, the GE4000 clears fumes and heat from workshops, dries freshly cleaned floors in stores and ventilates warehouses. Three speeds let you back it off when full output is too much.
AlorAir lists an operating range of 23°F to 160°F. Keep the inlets clear of sawdust and debris, and wipe the housing with a damp cloth.
At 37.83 to 40.87 lbs, the GE4000 is a two-hand lift. The HTC and HCW models add a pull-out handle and wheels so one person can roll it across a site, and every model has molded handles and a cord wrap.
Units stack on their sides, up to four high, for storage. Stacks are not secure in transit.
Got Questions?
Find answers below or contact our support team.
It draws 9.4 A at 115 V, so plan on one unit per 15 A circuit. AlorAir specifies GFCI protected outlets and no solid-state speed controllers.
AlorAir rates the GE4000 series at 80 dB, the loudest of the GE series. It is a job-site machine; drop to low speed in occupied buildings.
The suffix letters mark the extras: T is a 3-hour timer, F adds two washable intake filters, C adds a carpet clamp, H adds a pull-out handle with wheels, and W adds a digital panel with an 18-hour timer and app control.
18.6" x 16" x 20.2", and 37.83 lbs (GE4000T) to 40.87 lbs (GE4000HCW).
Yes. The T, TC and HTC models have a 3-hour dial timer; set it to ON to run continuously. The GE4000HCW has a digital timer from 0 to 18 hours.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}