AlorAir Helios MP55 55-Pint Crawl Space Dehumidifier with Pump
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Both Helios MP models carry a built-in condensate pump and come with two hoses: a 19.6' hose for pumping water up to 19.6' to a window, sink or sump, and a 6.5' hose for gravity drainage when a drain sits below the unit.
That makes the MP series a fit for crawl spaces and basements where the nearest drain is higher than the floor. Stand it on its adjustable leveling feet, or hang it from joists with an optional hanging kit.
Set relative humidity from 20% to 80% in 5% steps, or switch to GPP mode and set moisture content from 20 to 200 grains per pound. Choose CO to run continuously while drying out a wet space. The unit starts at 50% RH.
After a power cut it comes back on its last mode and setting once the three-minute compressor delay has passed, and automatic defrost keeps the coil clear in a cool crawl space.
The Helios MP series works in sealed crawl spaces and basements, and in warehouses, garages and shops where stock or tools need dry air. Adjustable leveling feet steady it on an uneven floor, and a top handle makes it easy to carry into place.
An auxiliary terminal block and a controller port take AlorAir's optional remote control and other external devices, so the unit can be managed without crawling back to it.
Got Questions?
Find answers below or contact our support team.
The built-in pump lifts water up to 19.6' through the included 19.6' pump hose, enough to reach a window, sink or sump above the unit. Where a drain sits below the unit, use the included 6.5' hose for gravity drainage instead.
AlorAir asks for a dedicated, grounded 15 A circuit with a 3-prong GFCI outlet, 115 V, 60 Hz. Do not use extension cords or plug adapters.
At 35.6°F or below the unit stops and shows LO, and at 102.2°F or above it shows HI. It restarts on its own once the space is back in range. Automatic defrost keeps the coil clear in cool conditions.
No. AlorAir's remote control is an optional accessory, sold separately, that connects to the controller port on the unit.
Leave the unit upright and out of the box for at least 24 hours before plugging it in. Transport can move oil inside the compressor, and letting it settle prevents problems at start-up.
Undo the 2 screws, remove the air intake grille, take out the filter and clean or replace it, then refit the grille. AlorAir also recommends cleaning the coils once a year with a self-rinsing foaming coil cleaner.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}