The AlorAir PureCare 1050 is a portable shop air filtration system that draws dusty air in through MERV-13 filters on both sides of its steel case. Its vortex fan runs at 850 or 1,050 CFM on 68 W, and AlorAir rates it for spaces up to 1,100ft².
At 17.4 lbs with a top handle and rubber feet, the PureCare 1050 goes wherever the dust is: next to the table saw, on the sanding bench or in the garage. A timer runs it for up to 120 minutes or continuously, and two auxiliary outlets let another tool share its cord.
Choose the standard 1050 or the 1050IG with a built-in ionizer.
Features
Dual-Side Intake
Filters on both sides of the case pull in air from two directions at once.
Two Speeds up to 1,050 CFM
LOW and HIGH buttons select 850 or 1,050 CFM, drawing 68 W.
MERV-13 Filters
Slide-out 10.35" x 8.19" x 0.71" MERV-13 filters catch fine wood dust and shop particles.
Timer up to 120 Minutes
Run it for a set time or continuously; it stops on its own and beeps when switched off.
Two Auxiliary Outlets
Plug in another PureCare unit or a tool and run both from one wall outlet, protected by the unit's circuit breaker.
Portable at 17.4 lbs
A top handle, rear cord storage and rubber feet make it easy to move and keep it steady on a bench.
Optional Ionizer (1050IG)
The 1050IG adds an ionizer that charges particles so the filters catch them more easily and helps reduce odors.
Specifications
-
Model: PureCare 1050 (standard) / PureCare 1050IG (ionizer)
-
Airflow: 850 / 1,050 CFM (2 speeds)
-
Coverage: Up to 1,100ft²
-
Filter Type: MERV-13, both sides, 10.35" x 8.19" x 0.71"
-
Intake: Dual-side
-
Ionizer: 1050IG only
-
Timer: Up to 120 minutes, or continuous
-
Auxiliary Outlets: 2
-
Voltage / Power: 115 V, 68 W
-
Power Cord: 11.5'
-
Noise: 57.2 dB
-
Operating Temperature: 20°F to 104°F
-
Dimensions: 11.81"L x 11.81"W x 13.78"H
-
Weight: 17.4 lbs
What's Included
- AlorAir PureCare 1050 or 1050IG air filtration system
- MERV-13 filters (installed)
- User manual
Setup & Placement
Stand the unit upright and level on the floor, a bench or a countertop in the area where dust is made, in a space that is fairly enclosed. Keep at least 6" of clear space around both the inlet and the outlet, and do not push either side against a wall.
Plug it into a grounded outlet. Clean the case with a soft damp cloth only, and unplug the unit before changing the filter.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers, air scrubbers and shop air filtration systems. The PureCare line is its range of air cleaners for woodworking shops, garages and other dusty workspaces.
The PureCare 780S and 1050 are the portable units in the line. The 780S has a single-sided intake and up to 780 CFM; the 1050 draws from both sides for up to 1,050 CFM and has a 1050IG version with a built-in ionizer. For a unit that hangs from the ceiling, the PureCare 780, 1080 and 1350 are the options.
