AlorAir PureCare 780S Portable Shop Dust Collector
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Press LOW or HIGH and turn the timer knob to run the unit for up to 120 minutes, or set it to run continuously. When the time is up, the unit stops on its own, and turning the knob to OFF gives a clear beep so you know it has shut down.
That lets it keep clearing the air after the last cut, without anyone coming back to switch it off.
Auxiliary outlets on the control panel (one on the 780S, two on the 1050) let you plug in a second PureCare unit or another tool, so both machines share one wall outlet and one cord run. The panel has its own circuit breaker.
The outlets are live whenever the unit is plugged in, even with the fan off. Check the load limit in the manual before plugging in a power tool.
Got Questions?
Find answers below or contact our support team.
Unplug the unit, slide the MERV-13 filter out of the inlet grille, and fit the new one the same way round. The 780S has one filter; the 1050 has one on each side, so change both at the same time.
No. It is designed for upright operation and should always sit level on the floor, a desk or a countertop. For a ceiling unit, look at the PureCare 780, 1080 or 1350.
No. It uses a MERV-13 filter, which is aimed at wood dust and fine shop particles. For HEPA filtration on restoration jobs, look at AlorAir's air scrubbers.
AlorAir rates both models at no more than 58 dB, quiet enough to leave running while you work.
AlorAir recommends an operating temperature of 20°F to 104°F.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}