AlorAir Sentinel HD35P 35-Pint Crawl Space Dehumidifier with Pump
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The Sentinel HD35P removes 35 pints a day at AHAM conditions (80°F, 60% RH) and up to 70 pints a day at saturation (90°F, 90% RH), from a 15.2" x 11.2" x 11.4" steel cabinet with a condensate pump built in. It covers up to 1,000ft² on a 2.9 A draw.
It suits small crawl spaces and basements where the nearest drain is above the unit. For more capacity in a similar footprint, step up to the Sentinel HD55 or HDi65S.
The digital panel shows live humidity and sets the target in 5% steps on the standard model, with continuous mode for drying out after a leak. The GPP button switches the readout to grains per pound (GPP), the weight of water in each pound of dry air.
The unit starts and stops on its own around your setpoint, restarts after a power cut and defrosts its coil automatically, down to 33°F.
The built-in condensate pump lifts water up to 19.6' through its own drain hose, sideways or straight up to a window, sink or sump. Where a drain sits lower than the unit, pull the rubber plug and use the 6.5' gravity hose instead.
The unit ships set to gravity drainage: hold the Drain button for 3 seconds to switch to the pump. A pump fault shows as an E4 code and stops the unit before water can spill.
Got Questions?
Find answers below or contact our support team.
The built-in pump pushes water up to 19.6' through the included pump hose. You can also drain by gravity through the 6.5' hose when a drain sits below the unit.
The HD35P ships set to gravity drainage. Hold the Drain button for 3 seconds until the Pump light comes on, and plug the gravity outlet with the rubber stopper when you use the pump.
AlorAir rates it from 33°F to 105°F, with automatic defrost for cool crawl spaces. Near freezing it shows LO and stops, so it is not meant for unheated winter spaces.
It draws 2.9 A at 115 V. AlorAir asks for a grounded 3-prong GFCI outlet on a 15 A circuit, with no extension cord or plug adapter.
The WiFi version connects to the AlorAir-C app, so you can turn the unit on or off, change the humidity setting and watch readings from your phone. Capacity, size and the pump are the same on both versions, and both work with AlorAir's optional wired remote.
Slide the MERV-1 filter out of the side to clean it, and clean the coils once a year with a self-rinsing foaming coil cleaner. Unplug the unit before any maintenance.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}