AlorAir Sentinel HD55 53-Pint Crawl Space Dehumidifier
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The Sentinel HD55 removes 53 pints a day at AHAM conditions (80°F, 60% RH) and up to 113 pints a day at saturation (90°F, 90% RH), covering up to 1,200ft² on a 4.0 A draw. Its 13.3"-tall steel cabinet fits under floor joists in most crawl spaces.
It drains by gravity only. If the nearest drain sits above the unit, choose the Sentinel HDi65S with its built-in pump, or add an external condensate pump.
Use the arrow keys to pick a humidity setpoint from 36% to 90% and the integral humidistat starts and stops the compressor on its own. Drop the setting below the bottom of the range for continuous mode when you need to dry a space out.
Most crawl spaces are held around 50% to 55% RH. After a power cut the unit restarts on its own, and automatic defrost keeps the coil clear down to 33.8°F.
The outlet takes 6" flex duct through the supply adapter, so the HD55 can sit in an unfinished area and push dry air into a finished room next door. The maximum duct length is 6'.
Pair ducting with the optional wired remote, mounted in the finished room on its 25' CAT 5 cable, so the unit reads the humidity where you live rather than where it sits.
Got Questions?
Find answers below or contact our support team.
No, it drains by gravity, so the drain line must run downhill with no loops or dips. AlorAir asks for at least 1" of fall per 10' of run. Terminals A5/A6 accept the level-alarm signal from an external condensate pump if you need to lift the water.
The operating range is 33.8°F to 104°F, with automatic defrost for cool crawl spaces. Outside that range the display shows LO or HI and the unit waits.
It draws 4.0 A at 115 V. AlorAir asks for a grounded 3-prong GFCI outlet on a 15 A circuit, and no extension cords or plug adapters.
The dehumidifier is the same. The WiFi version connects to the AlorAir-C app so you can check and change the setting from your phone. Both work with the optional wired remote.
The MERV-1 filter slides out of the cabinet for cleaning. AlorAir also recommends cleaning the coils once a year with a self-rinsing foaming coil cleaner, with the unit unplugged.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}