AlorAir Sentinel HS35 35-Pint Crawl Space Dehumidifier
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The Sentinel HS35 removes 35 pints a day at AHAM conditions (80°F, 60% RH) and up to 70 pints a day at saturation (90°F, 90% RH), from a 15.35" x 11.2" x 11.4" steel cabinet that weighs 37.8 lbs. It is rated for spaces up to 1,000ft² on a 2.9 A draw.
That size suits low crawl spaces, closets and small basements. For a larger or wetter space, or where water has to be pumped uphill, look at the Sentinel HD35P or HD55 instead.
There is no bucket to empty. Condensate runs out of the gravity drain port through the included hose to a floor drain, sump or outside, and a float switch lights the Full indicator if water backs up in the reservoir.
The HS35 has no pump, so the hose must run downhill from the unit. Set it on blocks or hang it from joists with a hanging kit (sold separately) to give the water somewhere to fall.
A single knob sets the unit: OFF, continuous, or a humidity setpoint of 30%, 50% or 70% RH. The integral humidistat then starts and stops the compressor on its own, and automatic defrost keeps the coil clear down to 33°F.
Four lights show power, defrost, a full reservoir and faults. There is no digital readout or WiFi, which keeps the HS35 simple to live with in a space you rarely visit.
Got Questions?
Find answers below or contact our support team.
No. The HS35 drains by gravity only, so the hose must run downhill to a floor drain, sump or outside. If the water has to go up to reach a drain, the Sentinel HD35P has a built-in pump.
The knob has fixed settings of 30%, 50% and 70% RH, plus continuous mode and off. The unit stops when the space falls below the setting and restarts when it rises above it.
The operating range is 33°F to 105°F. Automatic defrost clears ice from the coil in cool conditions, but the HS35 is not meant for spaces that fall below freezing.
It draws 2.9 A at 115 V. AlorAir asks for a grounded 3-prong GFCI outlet on a 15 A circuit, and no extension cords or plug adapters.
Slide out the MERV-1 filter to clean it, wipe the cabinet with a damp cloth, and clean the coils once a year with a self-rinsing foaming coil cleaner. Unplug the unit first.
Proud to Have Served
















































{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}