Skip to content

Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri

Shop Now

AlorAir Sentinel Pro 35X 35-Pint Commercial Dehumidifier with Pump

Original price $499.99 - Original price $499.99
Original price
$499.99
$499.99 - $499.99
Current price $499.99
Free shippingNo sales tax (excl. WY)
Only 2 leftIn stock now
 Estimated delivery
American Express Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa
Authorised dealer Factory-direct AlorAir
No sales tax On every order outside WY
30-day returns On unused equipment
My Clean Supplies customer support

Product support & personalised quotes

Monday to Friday 9:00AM to 5:00PM EST

A slim cabinet on four wheels

The Sentinel Pro 35X and Pro 55X share one 12.9" x 14.14" x 24.55" cabinet on four 360° wheels, sized for laundry rooms, basements, wine cellars and storage rooms. Set humidity from 25% to 80%, or run it continuously.

A GPP mode controls to moisture content instead of relative humidity, and the touch panel locks so settings stay put in a shared space.

Switch drainage with one button

Switch drainage with one button

Hold the Drain button for 3 seconds to turn on the built-in pump, which empties the unit through the 19.6' pump hose. For gravity drainage, fit the 6.5' hose to the lower outlet and keep its end below that outlet.

Plug whichever outlet you are not using with the water plug. A kinked or clogged hose stops the unit with an E4 alarm until it is cleared.

Automatic defrost and memory restart

Automatic defrost and memory restart

When frost forms on the coil in a cool room, the unit defrosts on its own and returns to its previous settings. After a power cut it restarts in the same mode once a 3-minute compressor delay has passed, keeping the setpoint, GPP mode and pump setting.

AlorAir rates both models from 37.4°F to 100.4°F. If the room drops to 35.6°F, the unit pauses with an LO code until it warms up.

Got Questions?

Find answers below or contact our support team.

How do I clean the filter?

Unplug the unit and pull the MERV-1 filter out of the air intake grille at the back. Vacuum it or rinse it in warm water with no cleaning agents, and let it air dry in the shade before refitting.

What is GPP mode?

GPP mode runs the unit to a moisture content target in grains per pound, set from 25 to 200 in steps of 5, instead of a relative humidity target. The display then shows moisture content.

Can I lock the controls?

Yes. Hold the Lock button for 3 seconds. All buttons except Lock and Power stop responding until you hold Lock again. The lock is not kept after a power cut.

What outlet does it need?

115 V, 60 Hz single phase from a grounded 3-prong GFCI outlet on a 15 A circuit. AlorAir advises against extension cords and plug adapters.

Where should I place it?

In a closed room, ideally near the center, standing upright on the floor with the inlet and outlet clear of walls. Close windows while it runs.

Does the pump need cleaning?

Occasionally. With the unit drained and unplugged, remove the two screws below the left air outlet, slide the handle down, and rinse the pump filter, float switch and drip tray with water before reassembling.

Proud to Have Served

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare