The AlorAir Storm Elite is AlorAir's large upright restoration dehumidifier, with app control and a heavy-duty pump. It removes 125 pints a day at AHAM conditions (80°F, 60% RH) and up to 270 pints a day at saturation (90°F, 90% RH), moving 300 CFM for spaces up to 3,000ft².
Both ends take 12" flex duct, so the Storm Elite can pull air from one room and deliver dry air to another. It rolls on two large-diameter wheels, and every color connects to the AlorAir app.
Features
125 Pints a Day at AHAM
Up to 270 pints a day at saturation, from a 300 CFM airflow at 2.4 L/kWh.
12" Ducting In and Out
Inlet and supply both take 12" flex duct, up to 20' total run or 12' when ducting one end.
AlorAir App Control
Every color connects directly or over WiFi for remote monitoring and setpoint changes.
Heavy-Duty Condensate Pump
Drains through the included hose on a quick-connect fitting; the line can rise up to 15'.
GPP at Inlet and Outlet
The LCD shows temperature, humidity and grains per pound at both ends, with job and lifetime hours.
Washable Pre-Filter and MERV-8 Filter
Both release with three buckles on the inlet for vacuuming or rinsing.
Hot Gas Defrost and Memory Restart
Clears coil ice in cool spaces and resumes its last settings after a power cut.
Rotomolded and Mobile
22.3" x 23.6" x 39.7" and 103 lbs, on two large-diameter wheels with a pull handle.
Specifications
-
Model: Storm Elite (New Version, WiFi)
-
Water Removal at AHAM (80°F, 60% RH): 125 pints/day
-
Water Removal at Saturation (90°F, 90% RH): 270 pints/day
-
Coverage: Up to 3,000ft²
-
Airflow: 300 CFM
-
Operating Temperature: 33.8°F to 105°F
-
Humidity Setpoint Range: 25% to 80%, plus continuous mode
-
Drainage: Built-in condensate pump, vertical rise up to 15'
-
Duct Connections: 12" inlet and 12" supply; 20' maximum total run
-
Power: 115 V, 60 Hz, 9.0 A
-
Electrical Requirement: Grounded 3-prong GFCI outlet
-
Power Cord: 18'
-
Efficiency: 2.4 L/kWh
-
Filter: Washable pre-filter and MERV-8
-
Noise: 63 dBA or less
-
Dimensions: 22.3"L x 23.6"W x 39.7"H
-
Weight: 103 lbs (47 kg)
-
Certifications: cETL
What's Included
- AlorAir Storm Elite dehumidifier
- Pre-filter
- MERV-8 filter
- Drain hose
- Power cord
- User manual
Setup & Placement
Place the unit on a level surface with the inlet about 6' from walls and obstructions. If it has been transported lying down, stand it upright for at least 30 minutes before switching on.
Attach the drain line to the quick-connect fitting on the base and run it to a drain or outside, rising no more than 15'. For ducting, fit 12" flex duct and keep the total run within 20'. Plug the cord into the socket near the top of the back, then into a grounded 3-prong GFCI outlet.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. The Storm series is its portable line for contractors who move equipment between job sites.
The Storm Elite matches the low-profile LGR 1250 and SLGR 1250X at 125 pints a day, in an upright body with 12" duct connections. The Storm Pro and Ultra share a smaller upright body at 85 and 90 pints a day, and the Storm 80X and Storm DP cover 80 and 50 pints. For permanent installs, the Sentinel line is the better fit.
