The AlorAir Storm Pro is an upright restoration dehumidifier with a heavy-duty condensate pump, sized for basements, offices and job sites up to 2,300ft². It removes 85 pints a day at AHAM conditions (80°F, 60% RH) and up to 180 pints a day at saturation (90°F, 90% RH), moving 210 CFM on 5.6 A.
The rotomolded body rolls on two large-diameter wheels with a rigid handle, and its 6" discharge can be ducted into an adjacent room. Every color connects to the AlorAir app.
Features
85 Pints a Day at AHAM
Up to 180 pints a day at saturation, from a 210 CFM airflow at 2.88 L/kWh.
Heavy-Duty Condensate Pump
Drains through the included hose on a quick connection at the base; the line can rise up to 15'. The pump unplugs on quick connectors for service.
AlorAir App Control
Connect directly or over WiFi so you can monitor a drying job remotely.
GPP at Inlet and Outlet
The LCD shows temperature, humidity and grains per pound at both ends, with job and lifetime hours.
6" Ducted Discharge
Fit flex or lay-flat duct to condition an adjacent room or focus dry air on one area.
Two-Stage Filtration
A washable pre-filter plus a MERV-8 filter that AlorAir recommends checking at least once a year.
Hot Gas Defrost and Memory Restart
Clears coil ice in cool spaces and resumes its settings after a power cut.
Rolls on Large Wheels
21.2" x 22" x 38" and 99.2 lbs, with a rigid handle and a cable and hose wrap.
Specifications
-
Model: Storm Pro (New Version)
-
Water Removal at AHAM (80°F, 60% RH): 85 pints/day
-
Water Removal at Saturation (90°F, 90% RH): 180 pints/day
-
Coverage: Up to 2,300ft²
-
Airflow: 210 CFM
-
Operating Temperature: 33.8°F to 105°F
-
Humidity Setpoint Range: 25% to 80% in 5% steps, plus continuous mode
-
Drainage: Built-in condensate pump, vertical rise up to 15'
-
Duct Connection: 6" discharge, flex or lay-flat duct
-
Power: 115 V, 60 Hz, 5.6 A
-
Electrical Requirement: Grounded 3-prong GFI outlet, 15 A time-delay fuse or breaker
-
Power Cord: 18'
-
Efficiency: 2.88 L/kWh
-
Filter: Pre-filter and MERV-8
-
Noise: 58 dBA or less
-
Dimensions: 21.2"L x 22"W x 38"H
-
Weight: 99.2 lbs (45 kg)
-
Certifications: cETL
What's Included
- AlorAir Storm Pro dehumidifier
- Pre-filter
- MERV-8 filter
- Drain hose
- Power cord
- User manual
Setup & Placement
Stand the unit upright and level, with the inlet and outlet clear of walls and obstructions. If it has been transported lying down, let it stand upright for at least 30 minutes before switching on.
Connect the drain line to the quick connection on the base and route it to a drain or outside; it can rise up to 15' on the way. Push the power cord firmly into the socket under the air outlet and plug into a grounded 3-prong GFI outlet on a 15 A circuit.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. The Storm series is its portable line for contractors who move equipment between job sites.
The Storm Ultra shares the Storm Pro's upright body and is rated at 90 pints a day, the Storm Elite steps up to 125, and the Storm 80X and Storm DP cover 80 and 50 pints a day in smaller uprights. The low-profile LGR 850 and LGR 1250 suit crews that stack units in a van.
