The AlorAir Storm SLGR 850X is an app-controlled restoration dehumidifier built on the Storm LGR 850 platform with AlorAir's SLGR precooling circuit added. It removes 85 pints a day at AHAM conditions (80°F, 60% RH) from a 210 CFM airflow and covers spaces up to 2,300ft² on 5.9 A.
AlorAir's SLGR circuit cools the incoming air close to its dew point before it reaches the evaporator, so more of the moisture condenses on the coil. Pair that with a built-in pump and the AlorAir app, and the Storm SLGR 850X can dry a flooded basement overnight while you check on it from your phone.
Features
SLGR Precooling Circuit
An auxiliary refrigerant path with its own expansion device feeds a microchannel precooler, which chills incoming air toward its dew point before the evaporator.
AlorAir App Control
Monitor readings and change settings from your phone, through the unit's hotspot or over WiFi.
85 Pints a Day at AHAM
From a 210 CFM airflow, rated for spaces up to 2,300ft², at 2.5 L/kWh.
Built-In Condensate Pump
Drains through the included hose on a quick connector. Keep the hose outlet no higher than 15'.
Inlet and Outlet Readings
The LCD shows temperature, humidity and GPP at both ends of the airflow, with job and lifetime hours.
Compact and Stackable
21" x 11.6" x 17.3" and 63 lbs, with a telescopic handle, two wheels and a shell that stacks for transport.
Washable MERV-8 Filter
Slides out for vacuuming or rinsing in warm water, with no tools.
Specifications
-
Model: Storm SLGR 850X (WiFi)
-
Water Removal at AHAM (80°F, 60% RH): 85 pints/day
-
Coverage: Up to 2,300ft²
-
Airflow: 210 CFM
-
Operating Temperature: 33.8°F to 110°F
-
Humidity Setpoint Range: 25% to 80% in 5% steps, plus continuous mode
-
Drainage: Built-in condensate pump, hose outlet no higher than 15'
-
Power: 115 V, 60 Hz, 5.9 A
-
Electrical Requirement: Grounded 3-prong GFCI outlet, 15 A circuit
-
Power Cord: 19.6'
-
Efficiency: 2.5 L/kWh
-
Filter: MERV-8
-
Noise: Less than 58 dBA
-
Dimensions: 21"L x 11.6"W x 17.3"H
-
Weight: 63 lbs (28 kg)
-
Certifications: cETL
What's Included
- AlorAir Storm SLGR 850X dehumidifier
- MERV-8 filter
- Drain hose
- Power cord
- User manual
Setup & Placement
Set the unit on a stable, level surface with the inlet and outlet clear, and close windows and doors for the fastest drying. If it has been carried or transported on its end, return it to its normal position and let it sit for 30 minutes before switching on.
Uncoil the full drain hose, clip it to the quick connector and run it to a sink, floor drain or outside, keeping the outlet no higher than 15'. Plug into a grounded 3-prong GFCI outlet on a 15 A circuit, with no extension cord.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, crawl spaces and basements. The Storm series is its portable line for contractors who move equipment between job sites.
In the Storm range, the LGR Extreme shares the 85-pint AHAM rating in a similar low body, the LGR 1250 and SLGR 1250X step up to 125 pints for large-loss jobs, and the upright Storm 80X, Pro, Ultra and Elite roll on large wheels with a pull-up handle. For permanent basement and crawl space installs, the Sentinel line is the better fit.
