The AlorAir X-Force Air Mover Base Unit is the blower on its own: the drive unit of the X-Force wall cavity drying system. Use it to add a second drive unit to an X-Force setup or to replace one in your fleet.
Connected by its outlet, it pushes dry air into structural cavities; connected by its intake, it pulls moist air out under negative pressure. A stainless steel base with cooling vents underneath and a double-walled polyethylene housing keep the X-Force base unit working job after job.
Features
Drives the X-Force System
The drive unit for AlorAir's X-Force system for drying inside walls, ceilings and cabinets.
Injection or Extraction
Connect the air line to the outlet to inject dry air, or to the intake to extract moist air.
Stainless Steel Base
A stainless steel base with vents underneath, under a double-walled polyethylene housing.
Top Carry Handle
A molded handle on top for moving the blower between rooms and jobs.
Stackable
Units stack for storage in the shop or van.
Specifications
-
Model: X-Force air mover base unit (blower)
-
Use: Drive unit for the AlorAir X-Force air drying system
-
Drying Modes: Positive (injection) or negative (extraction) pressure
-
Construction: Stainless steel base, double-walled polyethylene housing
-
Power: 115 V, GFCI-protected receptacle required
What's Included
- AlorAir X-Force blower (base unit)
Setup & Placement
Place the blower out of foot traffic, where it will not be knocked over or pulled by its connections, and keep the vents under the stainless steel base clear of carpet, fabric and debris. Plug it into a grounded, GFCI-protected 115 V outlet.
For injection, fit a silencer filter to the intake port and connect the air line to the outlet. For extraction, connect to the intake and exhaust the air outside or through a HEPA filter attachment, never into an occupied room.
Resources
Warranty & Shipping
Warranty. Backed by AlorAir's 12-month limited warranty from the date of delivery, covering defects in materials and workmanship. AlorAir handles warranty service directly, so keep your proof of purchase and the original packaging.
Shipping. Ships direct from AlorAir's U.S. warehouse, with free shipping on orders over $100.
Inspect on delivery. Check the carton and the unit when it arrives and note any damage on the delivery receipt before signing.
About AlorAir
AlorAir Solutions is based in Chino, California, and supplies dehumidifiers, air movers and air scrubbers for water damage restoration, mold remediation, crawl spaces and basements. Its restoration equipment is built to be carried from job to job and run for days at a time.
The X-Force base unit is the blower from AlorAir's X-Force cavity drying system, sold on its own. The complete X-Force Air Drying System adds everything needed to run air into the walls. For drying exposed surfaces, AlorAir's Zeus air movers are the better fit.
