ANZZI Collines Series 55" 2-Jetted Shower Tower

The ANZZI Collines Series 55" 2-Jetted Shower Tower comes in 2 versions: Brushed Nickel or Polished Chrome finish. Pick your options above to open the exact model, with its own price and details. The details below are for the Brushed Nickel version.

The ANZZI SP-AZ079BN is a Collines series 55" shower tower in brushed nickel with a thermostatic valve built into an ultra-thin panel, a Heavy Rain showerhead, two body jets and a handheld spray wand.

Steady, Scald-Protected Water

The thermostatic control holds a preset water temperature. ANZZI builds in anti-scald protection, with the highest outlet temperature limited to 49°C.

The Heavy Rain showerhead sends a cascading flow from above, two fully adjustable Acu-Stream jets give a tailored body massage, and the Euro-Grip handheld sprayer reaches 60" for precise water flow in hard-to-reach areas. A single diverter controls the water between rain shower, body jets and hand shower, so you choose a full-body shower or a focused stream. The tower runs at a water-saving 1.8 GPM.

The panel is laser cut and precision shaped from RHINO ALLOY certified brushed stainless steel, built from rust-free materials, and finished in brushed nickel. It arrives pre-plumbed, connecting to separate hot and cold 1/2" supplies through flexible reinforced stainless steel hoses, and ANZZI's manual lists it to IAPMO IGC 154 and ASME A112.18.1/CSA B125.1.

Planning the Installation

Because the thermostatic valve sits inside the panel, the Collines needs separate hot and cold 1/2" supplies at the wall, with the centres no more than 6" apart, rather than a single mixed outlet. Plan that with your plumber before the tile goes up. Mount the panel at a height that suits everyone who will use it.

The SP-AZ079BN stands 55.3" tall.

Three finishes share the same brushed stainless steel panel: brushed nickel, polished chrome and matte black.

The SP-AZ079BN is an ANZZI 55" thermostatic shower tower with a Heavy Rain showerhead, two Acu-Stream jets and a 60" Euro-Grip hand sprayer at 1.8 GPM.

Features

Built-In Thermostatic Valve
The thermostatic cartridge inside the panel holds a preset water temperature, set with its own thermostatic handle.

Anti-Scald Protection
ANZZI builds in anti-scald protection and limits the maximum outlet temperature of the panel to 49°C.

Heavy Rain Showerhead
The overhead Heavy Rain showerhead delivers a luxurious cascade from above with Heavy Rain water pressure, for a spa-like escape.

Two Adjustable Acu-Stream Jets
Two fully adjustable Acu-Stream body jets set into the panel give a soothing and tailored massage.

60" Euro-Grip Hand Sprayer
The Euro-Grip handheld sprayer reaches 60" on its hose, alongside the Heavy Rain showerhead and two body jets.

Single Diverter Control
One diverter moves water between the rain shower, jets and hand shower, while a separate thermostatic handle sets temperature.

Pre-Plumbed, 1/2" Supplies
The tower comes pre-plumbed with reinforced stainless steel hoses for separate 1/2" hot and cold supplies.

Brushed Nickel Finish
The brushed nickel finish is on RHINO ALLOY certified premium stainless steel, chosen for superior quality and resilience. The panel itself is RHINO ALLOY certified stainless steel made from rust-free materials.

Specifications

• Model: SP-AZ079BN
• Height: 55.3" (55" nominal)
• Material: RHINO ALLOY certified brushed stainless steel
• Finish: Brushed Nickel
• Installation: Wall mount, pre-plumbed to separate hot and cold supplies
• Valve: Thermostatic, anti-scald, maximum 49°C
• Showerhead: Heavy Rain
• Body Jets: 2 adjustable Acu-Stream
• Hand Shower: Euro-Grip, 60" reach
• Controls: Thermostatic handle and single diverter
• Flow Rate: 1.8 GPM
• Supply Connection: 1/2" hot and cold, centre to centre maximum 6"
• Water Pressure: 20 to 125 PSI
• Certifications: IAPMO IGC 154, ASME A112.18.1/CSA B125.1
• Series: Collines
• Warranty: Limited lifetime (register within 90 days)

What's Included

• SP-AZ079BN Collines shower panel with thermostatic valve and 2 body jets
• Heavy Rain showerhead
• Diverter and thermostatic handles, cartridges and escutcheons
• Euro-Grip hand shower, shower hose and holder
• Brackets, anchors, screws, washers, elbow fittings and hoses

Installation & Care

Installation
Wall mounted over separate 1/2" hot and cold supplies set no more than 6" apart centre to centre; adjust the plumbing so the panel fully covers the connection points. Supply pressure must be 20 to 125 PSI, and for the thermostatic valve the hot and cold pressures must not differ by more than 30% or it may not function. Fit stop valves between the hoses and the supplies. After hanging the panel, turn on the faucet and test all water functions of the shower panel and check all connections for leaks. Retighten if necessary, but do not overtighten. Leave about 6" between the showerhead and the average user's height and at least 1" below the ceiling. Indoor use only; ANZZI suggests a professional plumber if you are unfamiliar with plumbing. Tools: drill with 1/4" bit, screwdriver, channel locks, adjustable wrench, Allen key, rubber mallet, tape measure, Teflon tape.

Care
Clean the brushed nickel panel with regular soap and hot water on a non-abrasive cloth or sponge. Use only a non-abrasive cloth or sponge. Test any stronger cleaner on an inconspicuous spot, rinse completely right after applying it and never let it soak.

Resources

Shipping, Returns & Warranty

About ANZZI

ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.

The Collines tower comes in brushed nickel (SP-AZ079BN), polished chrome (SP-AZ079CH) and matte black (SP-AZ079MB).