The ANZZI L-AZ902MB-BN is an Angular series 8" widespread two-handle bathroom faucet in two-tone matte black and brushed nickel, drawn with sharp angles and crisp, flat lines for an ultramodern vanity. It installs on any 3-hole sink with 8" spacing.
Sharp Lines, Low Arc, Separate Hot and Cold
The low arc spout stands 4.53" high, runs 7.17" long and reaches 5.51" over the basin. Separate hot and cold levers let you set the exact water strength and temperature.
A 1.2 GPM water-saving aerator keeps flow strong at the tap while cutting the water used at every hand wash. The faucet comes with a matte black push pop-up drain, so it is ready to install out of the box.
Two-tone versions pair matte black with a second metal: brushed gold (L-AZ902MB-BG), brushed nickel (L-AZ902MB-BN) or polished chrome (L-AZ902MB-CH), alongside solid matte black (L-AZ902MB) and solid brushed nickel (L-AZ902BN).
Construction, Certification and Installation
ANZZI builds the Angular from durable brass and lists it as RHINO ALLOY certified, lead free and NSF/ANSI/CAN 61 compliant. The two-tone matte black and brushed nickel finish is designed to keep its look year after year with simple care.
Installation uses common water lines: each valve has a 1/2" male thread connection, and water pressure should be between 20 and 125 PSI. ANZZI highly recommends professional installation, and the box includes the Allen key and T-wrench used to secure the handles and spout.
Before starting, check every component against the parts list and make sure the supply lines are free of debris, with supply stops installed. The components list covers the spout, the handles and two valve assemblies, rubber and metal gaskets, lock nuts, the hoses, an O-ring, a metal washer and the aerator. The recommended tools are a wrench and a screwdriver, and anyone who has difficulty with the installation should contact a professional plumber.
ANZZI's manual walks through it in order: the spout goes in the centre hole with its O-ring and is secured from below with a rubber gasket, metal gasket and nut using the included T-wrench, then the two valve assemblies go in, the red-ring valve on the left for hot. Hoses connect each valve to the spout, and the valve inlets connect to your hot and cold supplies with hoses or copper tubes that are not provided. Remove the aerator with the key, flush the lines for one minute and fit the push pop-up drain last.
With a 1.2 GPM aerator, a push pop-up drain and lead-free brass under a two-tone matte black and brushed nickel finish, the L-AZ902MB-BN is an ANZZI 8" widespread two-handle bathroom faucet.
Features
Crisp Angular Styling
Flat planes and sharp edges on the spout and levers give the faucet an ultramodern outline.
Low Arc 4.53" Spout
The low arc spout is 4.53" high and 7.17" long with a 5.51" reach over the basin.
Separate Hot and Cold Levers
Two levers let you set water strength and temperature exactly, and each handle is secured with a screw, tightened with the included Allen key and covered with a button.
8" Widespread Three-Hole Fit
It installs on any three-hole sink or vanity top at 8" spacing, with the spout in the middle and a lever valve on each side, the red-ring valve on the left.
Matte Black Pop-Up Drain Included
A matte black pop-up drain is included, and the faucet is ready to install out of the box.
Brass Body, Lead Free, NSF 61
The durable brass construction is RHINO ALLOY certified, lead free and compliant with NSF/ANSI/CAN 61.
1/2" Male Thread Connections
Each valve takes a 1/2" male thread connection that fits most common water lines. Hoses or copper tubes to the supplies are not provided.
Matte Black-Brushed Nickel Finish
The durable brass construction is finished in matte black with brushed nickel, made to keep looking its best year after year.
Specifications
-
Model: L-AZ902MB-BN
-
Faucet Height: 4.53"
-
Spout: 4.53" H x 7.17" L, 5.51" reach
-
Material: Brass, RHINO ALLOY certified
-
Finish: Matte Black-Brushed Nickel
-
Installation: Deck mount, 3-hole 8" widespread
-
Handles: Two levers
-
Flow Rate: 1.2 GPM
-
Supply Connection: 1/2" male thread
-
Water Pressure: 20 to 125 PSI
-
Drain: Push pop-up drain included
-
Certifications: Lead free, NSF/ANSI/CAN 61
-
Series: Angular
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- L-AZ902MB-BN widespread spout and two valve assemblies with handles
- Push pop-up drain
- Spout hoses, gaskets, washers and lock nuts
- Aerator and aerator key
- Allen key and T-wrench
Sold separately: Supply hoses or copper tubes from the valves to the hot and cold supplies
Installation & Care
Installation
Deck mounted on a three-hole sink at 8" spacing; ANZZI highly recommends professional installation. Supply stops must be installed and lines free of debris, with water pressure of 20 to 125 PSI. Mount the spout, then the valves (red ring on the left), connect the spout hoses to the valve outlets, and connect the valve inlets to the hot and cold supplies with hoses or copper tubes, which are not provided, at the 1/2" male thread. Check for leaks and flush the lines for one minute with the aerator removed. The push pop-up drain installs through the sink drain hole.
Care
To preserve the metallic finish, ANZZI recommends applying a non-abrasive wax. Clean with regular soap and warm water on a soft, non-abrasive cloth, rinse and dry. use only a non-abrasive cloth or sponge on the two-tone matte black and brushed nickel finish, test stronger cleaners on a hidden spot first and do not let any cleaner soak.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Angular widespread faucet comes in five finishes: brushed nickel (L-AZ902BN), matte black (L-AZ902MB), and two-tone matte black with brushed gold (L-AZ902MB-BG), brushed nickel (L-AZ902MB-BN) or polished chrome (L-AZ902MB-CH) accents.
