The ANZZI L-AZ903MB Minimalist is a single hole bathroom faucet in matte black, an angular, low arc design 5.91" tall with a single lever and a matte black push pop-up drain in the box. It is an edgy, angular faucet designed to be a masterwork of minimalism.
Low Arc Spout
The low arc spout sits 4.92" high and reaches 5.04" over the basin. The streamlined lever gives easy, instant control of water volume and temperature.
A 1.2 GPM water-saving aerator uses less water while still delivering a strong flow. The faucet is certified lead free to NSF/ANSI/CAN 61 and RHINO-ALLOY certified. The braided hot and cold supply hoses come attached and finish in 3/8" compression connections.
The body is durable brass, finished in matte black. ANZZI certifies the faucet under its RHINO ALLOY quality standard.
One Hole, Drain Included
Single hole mounting keeps the deck clean and uncluttered: the faucet needs one 1.3" to 1.38" hole, and the included drain completes the sink so it is ready to install out of the box.
Installation needs only basic tools. The faucet seats on top of the sink with its O-ring, the rubber and metal gaskets and the lock nut go on from below and tighten by hand and then with the included T-wrench, and the red HOT and blue COLD braided hoses connect to 3/8" compression shut-off valves, hand tight plus a wrench, without pipe dope or sealant. Household pressure must be 20 to 125 PSI, and ANZZI suggests a professional plumber if you run into difficulty.
Clean the matte black finish with regular soap and warm water on a soft, non-abrasive cloth, then dry it. Keep abrasive pads off the finish; test any stronger cleaner on a hidden spot first and do not let it soak. ANZZI highly recommends professional installation.
Before first use, take the aerator off with the supplied key, turn the handle fully open and flush the lines for one minute, then refit the aerator. The pop-up drain body goes through the sink's drain hole with its gasket, a washer, a plastic washer and a lock nut secure it from below, and the outlet pipe threads on with a gasket between it and the body. To preserve the metal finish, a non-abrasive wax such as car wax can be applied, and the aerator should be cleaned regularly to clear calcium build-up.
The ANZZI L-AZ903MB Minimalist single hole bathroom faucet comes with a 1.2 GPM low arc spout and a matte black push pop-up drain in one box.
Features
Low Arc for Small Sinks
At 5.91" tall with a 4.92" spout height, the Minimalist has a low arc spout.
Matte Black Pop-Up Drain Included
A matte black push pop-up drain ships with the faucet, so it is ready to install out of the box.
Single Lever Control
One streamlined lever gives easy, instant control of water volume and temperature on the angular body.
One-Hole Install
The faucet mounts through a single 1.3" to 1.38" hole with a lock nut and gasket from below, for a sink drilled with one faucet hole.
3/8" Compression Supply Hoses
Attached braided hoses, labelled hot and cold, connect to standard 3/8" compression shut-off valves, hand tight plus a wrench, without pipe dope or sealant.
Lead-Free Brass Body
The durable brass body is certified lead free to NSF/ANSI/CAN 61 and RHINO-ALLOY certified, with braided supply hoses attached.
Matte Black Finish
Matte black is one of four finishes ANZZI offers for the Minimalist faucet, each over durable brass construction.
Specifications
-
Model: L-AZ903MB
-
Dimensions: Faucet 5.91" H; spout 4.92" H x 6.81" L x 5.04" reach
-
Material: Brass
-
Finish: Matte Black
-
Installation: Deck mount, single hole
-
Mounting Hole: 1.3" to 1.38"
-
Handles: Single lever
-
Spout: Low arc
-
Flow Rate: 1.2 GPM
-
Supply Connection: 3/8" compression, braided hoses attached
-
Water Pressure: 20 to 125 PSI
-
Drain: Push pop-up drain included
-
Certification: NSF/ANSI/CAN 61 lead free
-
Series: Minimalist
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- L-AZ903MB single hole bathroom faucet with attached braided hot and cold supply hoses
- Push pop-up drain
- Rubber gasket, metal gasket, lock nut and T-wrench
- Aerator
Sold separately: Supply shut-off valves
Installation & Care
Installation
Deck mount through one 1.3" to 1.38" hole. Seat the faucet with its O-ring on top of the sink, then slide the rubber and metal gaskets on from below and tighten the lock nut by hand and with the T-wrench. Connect the red HOT and blue COLD braided hoses to 3/8" compression shut-off valves (not provided), hand tight plus a wrench, without pipe dope or sealant. Water pressure must be 20 to 125 PSI; ANZZI recommends a professional plumber if you have difficulty.
Care
ANZZI recommends protecting the metal finish with a non-abrasive wax, such as car wax, and rinsing off any cleaner immediately. Use mild soap and a soft cloth, avoid abrasive pads on the matte black finish, and clean the aerator regularly to remove calcium build-up that reduces flow.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Minimalist faucet comes in matte black (L-AZ903MB) and three two-tone versions: matte black with brushed gold (L-AZ903MB-BG), brushed nickel (L-AZ903MB-BN) or polished chrome (L-AZ903MB-CH). ANZZI also lists a brushed nickel version, L-AZ903BN.
