The ANZZI SP-AZ079MB is a Collines series 55" shower tower in matte black with a thermostatic valve built into an ultra-thin panel, a Heavy Rain showerhead, two body jets and a handheld spray wand.
Steady, Scald-Protected Water
The thermostatic control holds a preset water temperature. ANZZI builds in anti-scald protection, with the highest outlet temperature limited to 49°C.
The Heavy Rain showerhead sends a cascading flow from above, two fully adjustable Acu-Stream jets give a tailored body massage, and the Euro-Grip handheld sprayer reaches 60" for precise water flow in hard-to-reach areas. A single diverter controls the water between rain shower, body jets and hand shower, so you choose a full-body shower or a focused stream. The tower runs at a water-saving 1.8 GPM.
The panel is laser cut and precision shaped from RHINO ALLOY certified brushed stainless steel, built from rust-free materials, and finished in matte black. It arrives pre-plumbed, connecting to separate hot and cold 1/2" supplies through flexible reinforced stainless steel hoses, and ANZZI's manual lists it to IAPMO IGC 154 and ASME A112.18.1/CSA B125.1.
Planning the Installation
Because the thermostatic valve sits inside the panel, the Collines needs separate hot and cold 1/2" supplies at the wall, with the centres no more than 6" apart, rather than a single mixed outlet. Plan that with your plumber before the tile goes up. Mount the panel at a height that suits everyone who will use it.
The SP-AZ079MB stands 55.3" tall.
Three finishes share the same brushed stainless steel panel: brushed nickel, polished chrome and matte black.
The SP-AZ079MB is an ANZZI 55" thermostatic shower tower with a Heavy Rain showerhead, two Acu-Stream jets and a 60" Euro-Grip hand sprayer at 1.8 GPM.
Features
Built-In Thermostatic Valve
The thermostatic cartridge inside the panel holds a preset water temperature, set with its own thermostatic handle.
Anti-Scald Protection
ANZZI builds in anti-scald protection and limits the maximum outlet temperature of the panel to 49°C.
Heavy Rain Showerhead
The overhead Heavy Rain showerhead delivers a luxurious cascade from above with Heavy Rain water pressure, for a spa-like escape.
Two Adjustable Acu-Stream Jets
Two fully adjustable Acu-Stream body jets set into the panel give a soothing and tailored massage.
60" Euro-Grip Hand Sprayer
The Euro-Grip handheld sprayer reaches 60" on its hose, alongside the Heavy Rain showerhead and two body jets.
Single Diverter Control
One diverter moves water between the rain shower, jets and hand shower, while a separate thermostatic handle sets temperature.
Pre-Plumbed, 1/2" Supplies
The tower comes pre-plumbed with reinforced stainless steel hoses for separate 1/2" hot and cold supplies.
Matte Black Finish
The matte black finish is on RHINO ALLOY certified premium stainless steel, chosen for superior quality and resilience. The panel itself is RHINO ALLOY certified stainless steel made from rust-free materials.
Specifications
-
Model: SP-AZ079MB
-
Height: 55.3" (55" nominal)
-
Material: RHINO ALLOY certified brushed stainless steel
-
Finish: Matte Black
-
Installation: Wall mount, pre-plumbed to separate hot and cold supplies
-
Valve: Thermostatic, anti-scald, maximum 49°C
-
Showerhead: Heavy Rain
-
Body Jets: 2 adjustable Acu-Stream
-
Hand Shower: Euro-Grip, 60" reach
-
Controls: Thermostatic handle and single diverter
-
Flow Rate: 1.8 GPM
-
Supply Connection: 1/2" hot and cold, centre to centre maximum 6"
-
Water Pressure: 20 to 125 PSI
-
Certifications: IAPMO IGC 154, ASME A112.18.1/CSA B125.1
-
Series: Collines
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- SP-AZ079MB Collines shower panel with thermostatic valve and 2 body jets
- Heavy Rain showerhead
- Diverter and thermostatic handles, cartridges and escutcheons
- Euro-Grip hand shower, shower hose and holder
- Brackets, anchors, screws, washers, elbow fittings and hoses
Installation & Care
Installation
Wall mounted over separate 1/2" hot and cold supplies set no more than 6" apart centre to centre; adjust the plumbing so the panel fully covers the connection points. Supply pressure must be 20 to 125 PSI, and for the thermostatic valve the hot and cold pressures must not differ by more than 30% or it may not function. Fit stop valves between the hoses and the supplies. After hanging the panel, turn on the faucet and test all water functions of the shower panel and check all connections for leaks. Retighten if necessary, but do not overtighten. Leave about 6" between the showerhead and the average user's height and at least 1" below the ceiling. Indoor use only; ANZZI suggests a professional plumber if you are unfamiliar with plumbing. Tools: drill with 1/4" bit, screwdriver, channel locks, adjustable wrench, Allen key, rubber mallet, tape measure, Teflon tape.
Care
Clean the matte black panel with regular soap and hot water on a non-abrasive cloth or sponge. Use only a non-abrasive cloth or sponge. Test any stronger cleaner on an inconspicuous spot, rinse completely right after applying it and never let it soak.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Collines tower comes in brushed nickel (SP-AZ079BN), polished chrome (SP-AZ079CH) and matte black (SP-AZ079MB).
