The ANZZI BA-LMDFX014AL is a 27" x 39" frameless LED bathroom mirror with front and back lighting (a lit band on the glass plus a soft halo on the wall behind it), a built-in defogger and color temperature you can set anywhere from 2700K to 6500K. It is made for the vanity wall, where a mirror needs clear light, plus Bluetooth speakers and a digital clock display.
Light You Can Tune from 2700K to 6500K
All of the controls are touch switches. A tap turns the LED light on or off; press and hold and the color temperature moves gradually from a warm 2700K to a cool 6500K. Press and hold the next switch and the brightness dims smoothly from 10% to 100%.
The built-in defogger works together with the light: it runs while the LED light is on. The defogger clears condensation from the mirror after a hot shower.
Copper-Free Glass Built for a Wet Room
The mirror is 5mm (1/5") copper-free silver glass that is RHINO-ALLOY certified. The copper-free glass is three times more resistant to corrosion than traditional mirrors. A safety film on the back holds the glass together if it is ever broken, which reduces the risk of injury from loose shards.
The mirror is rated IP44 waterproof and dustproof for wet bathroom environments, with a waterproof and moisture-proof backing. The electronics and LED driver are UL-certified, and ANZZI says its mirrors meet the latest safety standards.
This model adds Bluetooth: pair your phone and play music or a podcast through the integrated speakers. A digital display on the glass shows the time, the date and the room temperature, and the same touch keys set the clock (12 or 24 hour) and turn the screen off.
An acrylic diffuser spreads the LED light evenly.
Plug In or Hardwire
The BA-LMDFX014AL comes with a 5-ft cord and plug: it plugs into a GFCI outlet, or it can be hardwired into a junction box behind it for a cleaner wall with no visible cord.
For a frameless, anti-fog vanity mirror with adjustable light, IP44 protection and plug-in convenience, the ANZZI 27" x 39" LED bathroom mirror BA-LMDFX014AL covers the daily routine from the first shave to the last light of the evening.
Features
Adjustable 2700K to 6500K Color
Press and hold a touch switch to move the light from warm 2700K to cool 6500K.
Dimmable from 10% to 100%
Press and hold the brightness switch and the light changes gradually from 10% to 100%.
Built-In Defogger
A heated anti-fog pad behind the glass clears shower condensation while the light is on.
Acrylic-Diffused Light
An acrylic diffuser evens out the LED light, and the result is greater mirror clarity at the vanity.
Bluetooth Speakers and Clock Display
Pair a phone to play music through the integrated speakers, and read the time, date and temperature on the digital display in the glass.
5mm Copper-Free Silver Glass
The 5mm glass is copper-free, making it three times more resistant to corrosion than traditional mirrors.
Shatter-Resistant Safety Backing
A safety film on the back of the glass holds fragments together if the mirror breaks.
IP44 and UL-Certified Electronics
The mirror is rated IP44 waterproof and dustproof, and the electronics and LED driver are UL-certified.
Plug-In or Hardwire
The 5-ft cord plugs into a GFCI outlet for a quick install, or the plug can be removed to hardwire the mirror into a junction box for a cord-free wall.
Specifications
-
Model: BA-LMDFX014AL
-
Dimensions: 27" x 39"
-
Shape: Rectangular
-
Mirror Glass: 5mm copper-free silver mirror, RHINO-ALLOY certified, safety film back
-
Light Type: Front and back lighting
-
Color Temperature: Adjustable, 2700K to 6500K
-
Brightness: Dimmable, 10% to 100%
-
Defogger: Built-in
-
Controls: Touch switches
-
Audio: Bluetooth, integrated speakers
-
Display: Time, date and temperature
-
Diffuser: Acrylic
-
IP Rating: IP44
-
Electrical: 5-ft cord with plug, or hardwire; GFCI outlet required
-
Certifications: UL-certified electronics and LED driver
-
Warranty: Limited 3 years
What's Included
- BA-LMDFX014AL LED bathroom mirror with 5-ft power cord and plug
- Mounting screws and wall plugs
- Twist-cap wire connectors
- Position template
Installation & Care
Installation
Wall mount on a solid wall at the height that suits the vanity, with a GFCI outlet or a junction box behind it; two people are needed to handle the glass. Professional installation is highly recommended if you are not familiar with basic plumbing and electricity. Place the position template on the wall, mark the holes, drill 1/8" pilot holes into wood or 5/16" holes with the supplied wall plugs into concrete, and drive the screws leaving a 1/4" to 5/16" gap. For plug-in use, slide the mirror down onto the screws and plug it into the GFCI outlet. To hardwire, turn off the power, cut the cord near the plug and join live, neutral and ground to the junction box wires with the twist-cap connectors. The mirror must be grounded. Avoid hidden pipes and wiring when drilling, and do not lay the mirror on tile or concrete before hanging it. The manual's warnings also apply: connect the mirror only to a properly grounded outlet, keep the cord away from heated surfaces, do not use it outdoors or where aerosol products are being used, and supervise closely when it is used by or near children.
Care
Turn the mirror off at the switch or unplug it before cleaning. Wipe with a soft damp cloth, spray glass cleaner onto the cloth rather than directly onto the mirror, and use a mild soap diluted in water now and then to keep the glass and aluminum parts looking new. Never use abrasive cleaners, which can damage the finish or the exposed LED strips, and keep liquid away from the edges and switches.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI covers this mirror with a 3 year manufacturer warranty against defects in materials and workmanship, as stated on the ANZZI product page. Contact us for the full terms and how to file a claim.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
This Bluetooth mirror comes in 24" x 31" (BA-LMDFX012AL) and 27" x 39" (BA-LMDFX014AL). ANZZI also offers USB-charging, magnifying, back-lit and round LED mirrors.
